Schlöder VIS 1700 Voltage Interruption Simulator

IEC / EN 61000-4-11 (AC)
IEC / EN 61000-4-29 (DC)

The power fail simulator VIS 1700 is suitable to test voltage dips and fluctuations on the supply systems (AC and DC). The AC tests are defined in the IEC / EN 61000-4-11 and the DC tests in the IEC / EN 61000-4-29.

Performance feature

• • Short interruptions 100%: – AC and DC
  The supply network of the EUT can be interrupted in any phase position for a defined time

• • Voltage dips – phase relation
  Voltage drops on 40%, 70% or 80% of rated voltage can also be simulated at a given phase angle and time X. This test requires a second power source that meets a step transformer of sufficient capacity – see option VIS 740.

• • Voltage fluctuation – AC and DC
  Supply voltage fluctuations are typically carried out in a «ramp function». The VIS 1700 realized this in both AC and DC. The «fall time», the test time and «recovery time» can be set individually. Connecting a second voltage source is not required.

• • Inrush current measurement
  This special function allows a quick and easy way to determine the inrush current of the device under test (DUT) with respect to phase. It should be set only two values – phase angle and break time. After pressing the start button the voltage of the DUT is interrupted and switched on at the set phase angle again. The peak value of the inrush current is shown in the display, but can also be shown via an oscillograph.

 Schlöder VIS 1700 Voltage Interruption Simulator Data Sheet

Accessories

• VIS-1700_1 Voltage Interruption Simulator

• SESD 30 S 100 ESD-Soft 6 ESD Remote Control Software