EnglishPortugueseSpanish
Schlöder Product List

Schlöder- ESD Simulators
• SESD 216 ESD Simulator 16,5 KV
• SESD 230 ESD Simulator 30 kV
• SESD 30000 EDS Simulator 30 kV
• SEDS 2910 ESD – Test System 30 KV
Schlöder- EMC Generators / Measurement System
• CDG 7000 Conducted Disturbances Test System
• CWG 1500 Surge / Hybrid Generators
• CWG 2500 Surge / Combination Wave Generators
• MGA 1033 Magnetic Field Generator And Analizer
• CAL 1250 Magnetic Field Calibrator
• PG 01-2000 Pulse Generator
• PGA 1240 Immunity DC – 300 kHz
• PGA 1240-5A & PGA 1240-16A Power DC Generators
• PGA – 1330 Immunity Generator
Schlöder- Burst Generators
• SFT 1400 Burst Generator 125 KHZ
• SFT 1420 Burst Generator 2 MHZ
• SFT 2400 EFT/Burst Generator 2 MHZ
• SFT 2420 EFT/Burst Generator 2 MHZ
• VIS 1700 Voltage Interruption Simulator
Schlöder- CDN – Coupling Decoupling Networks
Schlöder- Coupling Networks For Burst & Surge
-CN 1240-32 And CN 1240-125 Coupling Switchable Networks
-Mains Operation 3-Phase
• CWG 520
• CWG 523 / CWG 523-550
• CWG 524 CWG 524-550
• CWG 524-B / CWG 524-B-550
Interconnection Lines / Surge test only
• CWG 1525
• CWG 1526
• CWG 1528
Schlöder Current Monitoring Probes
• CDG CMP-45 Current Monitoring Probe
• CDG CMP-46 Current Monitoring Probe
• CDG A CMP-46 Calibration Set for the CDG CMP-46 Current Monitoring Probe
Schlöder- Accessories
-Burst Generator Accessories
• CWG 520 – 3-phase coupling network, 4 x 16 A – Burst and Surge
• CWG 523, CWG 523-550, CWG 524 CWG 524–550 – 3-phase Coupling Network, 4 x 32 / 60 A – Burst and Surge
• CWG 524-B – 3-phase Coupling Network, 4 x 60 A – Burst only
• EMV-SOFT – Remote control software for SFT, CWG, VIS
• SFT 415 – Capacitive Coupling Clamp (CCC)
• SFT 415-1 – Capacitive Coupling Clamp with protection cover
• SFT 415-CS – Calibration Set for verification the CCC
• SFT 430 HV Cable for Burst Generator
• SFT 450-Set – Attenuator Set
• SFT 470 – Probe set for Burst generator to create short time magnetic fields
ESD Simulator Accessories
• SESD 271 – Vertical Coupling Plate
• SESD 272 – Earth Cable
• SESD 30 S 120 – ESD Remote Control Software
• SESD 30 T 1000 – Support Arm with Balancer
• SESD 3020 – SESD 3027 – Test Tip´s for ESD
• SESD 3036 – Hook for Balancer
• SESD 8800-4 – ESD Target 4GHz
Surge / Hybrid Generator Accessories
• CWG 520, CWG 520 / 550 – 3-Phase Coupling network
• CWG 523, CWG 523-550, CWG 524, CWG 524-550- Coupling networks for Burst and Surge testing
• CWG 550 – External 18 µF capacitor in a housing
• CWG 553 – External 0,5 µF capacitor + 40 Ohm resistor in housing
• CWG 554 – External 9 µF + 10 Ohm resistor in housing
• CWG 1525 – CDN for 2 unshielded, balanced signal lines, 1 A, with gas discharger arrester
• CWG 1526-4, CWG 1526-10 – CDN for 2 unshielded, unbalanced data – and signal lines, 4 A or 10 A
• CWG 1528 – CDN for 4 unshielded, unbalanced data – and signal lines, 6 A, with RS 232 interface
• EMV-SOFT – Control software for SFT, CWG and VIS generators
Immunity, 10 kHz – 230 MHz Accessories
• CDN xxx -Coupling/Decoupling
• CDG A 31xx – Calibration adapters for CDN’s
• CDN-EMCL-20 & CDN EMCL-35 – EM Clamps
• CDN ABCL-20 – Decoupling Clamp
• CDN EMCL-NW_10 – Matching Network
• BCI-P1 – Clamp Bulk Current Injection (BCI) with Calibration Set
• CDG CMP-45 – Current Monitoring Probe With Calibration Set
• CDG CMP-46 – Current Monitoring Probe
• CDG A CMP-46 – Calibration Set
• CDG 6050 – 6dB Attenuator, 20W
• CDG 6050-100W – 6dB Attenuator, 100
Immunity, DC – 150 KHZ Accessories
• CN xxx - Coupling Networks
• CN 1240 xx - Coupling networks, switchable
Magnetic Field Generator Accessories
• CMGA_HCST - Helmholtz Coils
• MGA_LS/RL - Loop Sensor
• MGA_Bx - Test adapter, EN 55103
Voltage Interruption Simulator Accessories
• VIS 740 Step Transformer
• EMV-SOFT - Control software for SFT, CWG and VIS generators
Schlöder- Helmholtz Coils
Schlöder- Signal Generator SG 0282
Schlöder- Isolation – Transformers With Double Shield Winding
Schlöder Power Frequency Magnetic Field Immunity Tests
• Schlöder MGA_BC-500 Field Coil acc. to EN 55103-2
• Schlöder MGA 1030 Magnetic Field System Data Sheet
• Schlöder MGA 1030 Magnetic Field Generator and Analyzer Additional Equipment Data Sheet
Products By Standars

Company Overview
Data Sheets
Product List

Request a Quote / Contact Us!

    Manufacturer

    Part Number or Numbers

    SFT 2400 EFT/Burst Generator

    Schlöder SFT 2400 EFT/ Burst Generator
    Schlöder SFT 2400 EFT/ Burst Generator

    IEC 61000-4-4 and EN 61000-4-4

    • Operation via capacitive color touch display

    • Burst – frequency up to 125 kHz, pulse amplitude up to 5.0 kV

    • Modification of all parameters during the test possible

    • Single impulse to permanent burst, various special functions

    • Max. 5000 pulses / sec. and 500 pulses / packet

    • Time accurate triggering

    The SFT 2400 with integrated coupling network simulates electrical fast transient (EFT) as defined in IEC 61000-4-4 and EN 61000-4-4 standards. Due to the very short rise time of 5ns, the individual pulses generate a broadband RF spectrum up to 300 MHz.

    The simple operation takes place via a capacitive color touch display. All parameters are clearly displayed without nested menus and can be changed quickly by tapping and using a digital rotary encoder. The normative test levels 1, 2, 3 and 4 are preprogrammed, additional test sequences can be stored via the memory function.

    The SFT 2400 also offers a variety of special features such as «Real Burst», which simulates the natural appearance of the burst pulse or «noise» which simulates contact bouncing. The functions «IFM» and «DFM» (increasing or decreasing frequency) are important tools for examining resonance or saturation effects in the device under test.

    Burst Definition

    Definition in the Standard

    SFT 2400

    Burst duration

    15 ms ± 20% at 5 kHz
    0.75 ms ± 20% at 100 kHz
    (corresponds to 75 pulses /package)

    0.01 – 100 ms *1

    Burst period

    300 ms ± 20 %

    10 – 1000 ms *1

    Burst frequency

    5 kHz or 100 kHz
    up to 4 kV

    100 Hz – 125 kHz
    up to 5 kV

    Pulse Amplitude

    0.5 / 1 / 2 / 4 kV

    100 V – 5000 V (into 10 V steps)

    Pulse rise-time

    5 ns ± 30 %

    *1: the SFT 1400 automatically
    takes into account the
    maximum power restrictions

    Pulse width (50 Ohm)

    50 ns ± 30 %

    Pulse-width (1 kOhm)

    50 ns, -15ns/+100 ns

    Impedance

    50 Ω ± 2 %

     

    Technical specifications

    Generator
    • Burst frequency single pulse up to 125 kHz
    • Pulse amplitude 100 V – 5000 V
    • Polarity positive, negative, alternating
    • Pulse shape acc. to IEC / EN 61000-4-4
    • Max. number of pulses / s 5000 (up to 2kV); 3000 (3kV) and 1500 (up to 5kV)
    • Max. number of pulses / burst 500
    • Remote Control: USB (virtual COM port)
    • Option: optical interface with fiber optic

     

    Coupling / Decoupling Network
    • Integrated in the generator, coupling the test pulses to supply lines of the test object
    • Operating volt. AC max. 230V / 16A, 50 Hz
    • Operating volt. DC max. 110V / 8A
    • Phase indicator LED red / green
    • Coupling capacitors 33 nF
    • Coupling selectors L, N, PE ->E; L, N->E; a.s.o.
    • EUT power outlets AC power socket (Schuko), additionally laboratory sockets
    • Operation temperature 0 – 40 °C
    • Dimensions 19” housing, 3U
    • Weight app. 9 kg
    • Power supply 100-240V /47-63 Hz

     

    Accessories
    • 3-Ph. Coupling network 4 x 16 A, Burst + Surge CWG 520
    • 3-Ph. Coupling network 4 x 32 A, Burst + Surge CWG 523
    • 3-Ph. Coupling network 4 x 60 A, Burst + Surge CWG 524
    • 3-Ph. Coupling network 4 x 60 A, Burst CWG 524-B
    • Attenuator 100:1 / 50 Ohm SFT 450
    • Probe set, magnetic field SFT 470
    • Capacitive coupling clamp SFT 415
    • Capacitive coupling clamp with protection cover SFT 415-1
    • HV-Cable for capacitive coupling clamp SFT 430
    • Calibration set for coupling clamp SFT 415-CS
    • 50 Ω attenuator SFT 450-1
    • 1000 Ω attenuator SFT 450-2
    • 50 Ω + 1000 Ω attenuator set SFT 450-Set
    • Optical interface with 10m fiber optic cable OPT_I_2
    • Control Software for Burst / Surge / VIS EMV-SOFT

     

    Aaronia_AG_BicoLOG_5070_Biconical_Antenna_Data_Sheet Schlöder SFT 2400 EFT/Burst Generator Data Sheet