EnglishPortugueseSpanish

Request a Quote / Contact Us!

    Manufacturer

    Part Number or Numbers

    PHIL Power - Hardware - In - The - Loop

    SPITZENBERGER & SPIES

    PHIL POWER – HARDWARE – IN – THE – LOOP

    Spitzenberger Spies PHIL Power in the Hardward Loop Diagram

    Spitzenberger Spies PHIL Power Hardward in the Loop Diagram

    Two big subjects are defining the quality and accuracy of a PHIL system:

    1. The delay time between interface output terminal and power output plug of the power amplifer

    2. The stability of the system consisting of:

    – the overall stability of the control loop (interaction between simulation and hardware)

    – the electrical stability of the power amplifier’s output signal

     more information on request

     THE REAL BENEFITS OF THE SPITZENBERGER & SPIES PAS 4-QUADRANT LINEAR POWER AMPLIFIERS INTEGRATED IN PHIL (power-hardware-in-the-loop) ARE:
    • speed

    • performance

     With the very low transition delay time of the PAS amplifier, the combination of a high level simulator with the technical advanced 4-quadrant power amplifiers from Spitzenberger & Spies will lead to the perfect PHIL testing system.

    The lower the time delay between the adjustment of the simulator output parameters and the feedback of measurement data into the simulator is, the better the stability of the overall PHIL system.

    In addition, the system performance increases extensively and the simulation approaches the reality very closely.

    With the PAS amplifier system the power output is always a fast and stable signal even with high non-linear loads, no matter whether they are pure inductive or pure capacitive.

    Any type of PHIL EUT’s can be connected. Especially motor-driven components with high initial current consumption can easily be supplied by the PAS. The short-time power capability of the PAS can supply the connected motor with the double nominal power for a time period of up to 10 minutes.

    Even EUT’S with a capacitive input stage like rectifying bridges with high peak current consumption can be supplied using the peak power capability of the PAS.

    The PAS peak power capability extends the output power up to 4 times the nominal power for a time period of up to 3ms.

    PAS SERIES THE REFERENCE SOURCE FOR ALL APPLICATIONS

    ■ Very fast slew rate >52V/µs at 230Vrms as required by EN 61000-4-11
    ■ Operates from DC up to 5kHz large signal bandwidth (-3dB) optional up to 30kHz
    ■ Small signal bandwidth up to 100kHz
    ■ High long-term (1 hour) overload characteristic
    ■ High short-term (5-10 min) overload characteristic
    ■ Very high peak load ability (up to 5ms)
    ■ Very low internal resistance

     

    A/C D/C 4-QUADRANT AMPLIFIERS

    ASSOCIATED DOWNLOADS

     Spitzenberger & Spies 4-Quadrant Amplifier type PAS 5000 Data Sheet

     IEC/EN 61000-3-2 – Harmonic Performance

     IEC/EN 61000-4-11 – Monitoring Measurements and Inrush current source