EnglishPortugueseSpanish

Request a Quote / Contact Us!

    Manufacturer

    Part Number or Numbers

    EUROFINS YORK - Comparison Noise Emitter - CNE VI

    The CNE VI is the latest generation broadband noise source, capable of providing a continuous output from 30 Hz and 6 GHz. The stable output allows the CNE VI to be used as a general purpose reference source for characterizing and verifying both conducted and radiated test environments.
    • Continuous broadband output
    – Full spectrum measurements and analysis
    • Stable output
    – Repeatable measurements
    • 30 Hz to 6 GHz output
    – Applications across a broad frequency spectrum
    • Compact and portable
    – Comparisons between sites and environments
    • Battery powered
    – No power or interconnecting cable effects on measurements
    The CNE VI is a broadband noise source that is capable of producing a continuous noise output within the 30 Hz to 6 GHz frequency range. The broadband nature of the output enables the observation of details within the spectrum that would be missed using a comb generator.
    The CNE VI features two separate outputs; a 50Ω BNC connector for the 30 Hz to 30 MHz signal and a 50Ω N-type output connector for the 30 MHz to 6 GHz signal. For radiated operation, either output
    can be attached to a selection of antennas available in a range of frequency coverage and types. An IEC 320 adapter is also available to provide a connection to LISN equipment, as well as an RJ11/RJ14/RJ25/RJ45 adapter for connection to telecoms ISNs.
    The CNE VI is an ideal source for carrying out checks on Open Area Test Sites (OATS) and fully or semi-anechoic chambers. The CNE VI is compact and battery powered, allowing operation as an electrically small source, which minimizes the effect of the CNE VI itself when characterizing the electromagnetic environment. The CNE VI is housed in a metal enclosure so that it can be mounted in direct contact with a metal ground plane as may be required by some tests.

     

    STANDARD ORDER KITS

    Part # Description Parts Included
    CNEVKIT03 Standard CNE V+ comparison continuous noise emitter kit with antenna
    • · CNE V+ noise source
    • · TLM01 – 200MHz to 1GHz (optimum) 100mm long top-loaded monopole antenna
    • · Alkaline battery
    • · Hard case
    • · CAL01 standard test results
    CNEVKIT04 Enhanced CNE V+ comparison noise emitter kit with multiple antennas and LISN adapter
    • · CNE V+ noise source
    • · TLM01 – 200MHz to 1GHz (optimum) 100mm long top-loaded monopole antenna
    • · TLM02 – 30MHz to 300MHz (optimum) 290mm long top-loaded monopole antenna
    • · MCN01 – 1GHz+ (optimum) monocone antenna
    • · LSA02 – LISN adapter with IEC-style connection
    • · Alkaline battery
    • · Hard case
    • · CAL01 standard test results

    ACCESORIES

    Accessory Part # Description
    Antenna TLM01
    • 200MHz to 1GHz (optimum) 100mm long top-loaded monopole
    Antenna TLM02 30MHz to 300MHz (optimum) 290mm long top-loaded monopole
    Antenna MCN01 1GHz+ (optimum) monocone antenna
    Direct coupler LSA02
    • LISN adapter with IEC-style connection

     

    OUTPUT MEASUREMENT RESULTS

    Type

    Order Nº

    Description

    Direct Output

    CAL01

    0 to 5GHz power measurement using spectrum analyzer

    Radiated Output

    CAL02

    30MHz to 1GHz horizontal and vertical polarization electric field-strength on OATS using receiver, either 3m or 10m

    Radiated Output

    CAL06

    30MHz to 1GHz horizontal and vertical polarization electric field-strength in FAR using a spectrum analyzer at 3m

     

    CNEV - Comparison Noise Emitter Vi - York EMC

     

    Shipping Container dimensions and weight information

    Shipping Container: 52x 42x 28 cm

    Weight (Container & Unit): 5 kg.

     

    All freight documentation for Repairs and Calibrations must include: “Import under IPR CPC 5100001 – Goods of UK origin returned for repair/calibration – Items are to be imported under IPR CPC 5100001 being goods of UK origin, temporarily returned for repair/recalibration”

    ASSOCIATED DOWNLOADS

    CNEVIKIT01 & CNEVIKIT02- Comparison Noise Emitter VI – Data Sheet

    How to use a Comparison Noise Emitter (CNE) to check Line Impedance Stabilization Network (LISN) performance