EnglishPortugueseSpanish

Request a Quote / Contact Us!

    Manufacturer

    Part Number or Numbers

    Clamps: Absorbing, Injection And CCC

    • CCC 9224 Capacitive Coupling Clamp
    • CCP 9225 Capacitive Coupling Plate
    • CMAD 1614 Common Mode Absorption Clamp/Device
    • CAL CMAD 1614 – Calibration Fixture for CMAD 1614
    • EM 101 + FTC 101 – Replaced by the KEMZ 801AS 
    • EM 101 Cal KiT – Replaced by the KEMZ 801AS
    • EM 101 Current Injection ClamP – Replaced by the KEMZ 801AS
     FT 33X15 Surface Current Blocking Filter
     FTC 101 Surface Current Blocking Filter Clamp
     FTC40X15E Absorbing Clamp
     KEMZ 801 AS EM CLAMP FOR IEC / EN 61000-4-6
     MDS 21 B EMI Absorbing Clamp
     SW 9605 Current Transformer Clamp
     SW 9606 Current Injection Clamp

     

    CCC 9224 Capacitive Coupling Clamp 

    Schwarzbeck CCP 9224 Capacitive coupling clamp for transients acc. to ISO 7637-3 or DC-10614

     · Capacitive coupling clamp for transients according to to ISO 7637-3 or DC-10614 B.5.

    pdficon small Data Sheet CCC 9224

     

    CCP 9225 Capacitive Coupling Plate 

    Schwarzbeck CCP 9225 Capacitive Coupling Plate 

    · Capacitive coupling plate

    · The main application is to conduct CV-tests (capacitive voltage measurements).

    · The capacitive coupling plate CCP 9225 complies to the automotive manufacturer standard MBN 10284-2 2011-04, Annex B. 

    pdficon small Data Sheet CCP 9225

     

    CMAD 1614 – Common Mode Absorption Clamp/Device 

    Schwarzbeck CMAD 1614 Common Mode Absorption Device

    Schwarzbeck CMAD 1614 Common Mode Absorption Device open

    The CMAD 1614 – Common Mode Absorption Device consists of many precision cut ferrite half-toroids, which are embedded in a grey plastic housing. The unique floating toroid bearing ensures a perfect fit of the ferrite surfaces. Two quick-locks at the long side allow opening and closing of the clamp within seconds.
    Cable bundles or coaxial cables with a maximum diameter of 26 mm are accepted by the clamp without disassembling connectors or interrupting any circuitry.

    The combination of short length and large cable hole diameter offer a broad variety of applications for the CMAD 1614. 

    Each common mode absorption device comes with an individually measured calibration certificate.

    The CMAD 1614 can be used for both, coaxial cables and unshielded cable bundles, in order to suppress unwanted common mode currents (also called braid currents). Since these unwanted common mode currents are very often a reason for poor repeatability of measurements, the new CISPR 16-1-4 standard recommends the use of absorbing clamps.

     

    Frequency Range: 30 MHz – 200 MHz
    Specified in: CISPR 16-1-4
    Usable Frequency Range: 10 MHz – 1 GHz
    S11 (30 MHz): 0.6 – 0.75
    S11 (200 MHz): 0.4 – 0.55
    S21: < 0.25
    Max. Cable Diameter: 26 mm
    Housing Material: PVC
    Housing Dimensions: 66 x 70 x 414 mm
    Weight: 3.2 kg

    pdficon small Schwarzbeck CMAD 1614 – Common Mode Absorption Clamp/Device Data Sheet

     

    CAL CMAD 1614 – Calibration Fixture for CMAD 1614 

    CAL CMAD 1614 - Calibration Fixture for CMAD 1614

    The CAL CMAD 1614 calibration fixture is used to calibrate / verify the performance of the common mode absorption device CMAD 1614. The fixture consists of an aluminium base plate with two sideplates, adjustable in height and position and each of them equipped with N-connector and inner conductor fixture. A variety of inner conductors with 4 mm diameter is part of the delivery. The calibration fixture was designed for measurements acc. to CISPR 16-1-4 sections 9.5 and 9.6.

     

    Frequency Range: 30 MHz – 200 MHz
    Specified in: CISPR 16-1-4
    Useable Frequency Range: 10 MHz – 1 GHz
    Material: Aluminium
    Dimensions: 113 x 150 x 788 mm
    Weight: 2.2 kg

     pdficon small Schwarzbeck CAL CMAD 1614 – Calibration Fixture for CMAD 1614 Data Sheet

     

    EM 101 + FTC 101 – Replaced by the KEMZ 801AS 

    · System injection clamp EM 101 with braid current blocking clamp FTC 101

    · FT14X15 Surface current blocking filter 100 – 1000 MHz

    pdficon small Schwarzbeck FG14x15 Injection and Braid Current Blocking Data Sheet

     

    EM 101 Cal Kit – Replaced by the KEMZ 801AS 

    · Calibration kit for EM 101

    · consisting of 2ea CR 100

    · 1 safety lab cable 10 cm

    · 1ea cable 80 cm

    · both sides banana

     

    EM 101 Current Injection Clamp– Replaced by the KEMZ 801AS 

    · Current Injection Clamp

    · 0.15 – 1000 MHz

    · 100 W

    · 4kV max.

    · max. cable diameter 22mm 

    pdficon small Schwarzbeck EM 101 Current Injection Clamp Data Sheet

    pdficon small Schwarzbeck EM 101 Current Injection Clamp Manual

    pdficon small Schwarzbeck EM 101 Current Injection Clamp Data

     

    · FT34X15 Surface current blocking filter 1 – 1000 MHz 

    · FT 32 Surface current blocking filter 0.01 – 1000 MHz

    pdficon small Schwarzbeck FT 32 Surface Current Blocking Filter Data Sheet

    · FTC40X15C Absorbing Clamp 10 – 1000 MHz

     

    FT33X15  

    · Surface current blocking filter

    · 10 – 1000 MHz

    pdficon small Schwarzbeck FG 33X15 Surface Current Blocking Filter Data Sheet

     

    FTC 101  

    · Surface current blocking filter clamp

    · (in combination w. EM 101) 

    pdficon small Schwarzbeck FTC 101 Surface Current Blocking Filter Clamp Data Sheet

     

      

    FTC40X15E  

    · Absorbing Clamp

    · 1 – 1000 MHz

    · CISPR 22

    pdficon small Data Sheet FTC40X15E

     

    KEMZ 801AS EM CLAMP FOR IEC / EN 61000-4-6 
    KEMZ-801AS

    EM Clamp, compliant with IEC 61000-4-6 (incl. edition 4), supplied with adapter set CAL 801A for stress level setting, incl. traceable calibration (certificate according ISO17025)

    pdficon small KEMZ 801AS EM CLAMP FOR IEC / EN 61000-4-6 Data Sheet

     

    MDS 21 B EMI Absorbing Clamp 

    Schwarzbeck MDS 21 B Absorbing Clamps

    Schwarzbeck MDS 21 B Absorbing Clamps 2

    · EMI Absorbing Clamp

    · 30 – 1000 MHz

    · according to CISPR 16 for interference power with silicon coated rolls

    Also for shielding measurements on coax. cables

    pdficon small Schwarzbeck MDS 21 B EMI Absorbing Clamp Data Sheet

    pdficon small Schwarzbeck MDS 21 B EMI Absorbing Clamp Features

     

    SW 9605 Current Transformer Clamp  

    Schwarzbeck SW 9605 Current Transformer

     · Current Transformer Clamp

     · CISPR 22

     · 9 kHz – 80 MHz

     · Transfer Impedance: 1 Ohm for wires up to 23 mm

     Data Sheet SW 9605

     

     

    SW 9606 Current injection clamp  

    SW-9606

     · Current injection clamp for RF current injection into harnesses

    up to 23 mm diameter

     · transducer 18 dB 

     Data Sheet SW 9606