EnglishPortugueseSpanish

Request a Quote / Contact Us!

    Manufacturer

    Part Number or Numbers

    AFJ-VVL 1530 Van Veen Loop Antenna

    AFJ Technology VVL 1530 Van Veen Loop Antenna

    CISPR 15 Testing Requirements:
    The CISPR 15 radiated electromagnetic disturbances measurement standard is in the frequency range from 9kHz to 30MHz.
    This standard is applicable to any luminaries (lighting: Florescent, LCD, etc.) which requires disturbance voltage tests and supplies the lamps at frequencies in excess of 100Hz.
    The test is performed within an enclosed loop antenna of 2m loop diameter. Antennas of this type are known as a Van Veen Loop as defined on CISPR 16-1-4 and consist of three orthogonal loops enclosing a platform where the EUT is positioned.

    AFJ VVL 1530 Van Veen Loop Antenna Junction Box

    VVL 1530 Junction Box

    AFJ VVL 1530 Stand/Footer

    VVL 1530 Stand/Footer

    The VVL 1530 is a calibrated 2-metre large Van Veen Loop antenna designed and manufactured to comply with CISPR 15 and CISPR 16-1-4 requirements. The current probes around the inner conductor of each coaxial antenna-cables have a sensitivity of 1V/A over the
    frequency range from 9kHz to 30MHz, so no antenna factor is needed to use during measuring. The calibrated frequency range is 9kHz to 30MHz.

    The VVL 1530 is a complete 3-axis antenna with a manual switching unit to select each loop in turn. The loops are 2m in diameter with the lowest point 0.5m above ground and are fitted with specially designed current transducers in fully screened housings. Environment interference is strongly suppressed in open area measurements.

    AFJ Instruments VVL 1530 Van Veen Loop Antenna Technical Image

    AFJ VVL 1530 Van Veen Loop Antenna Details:

    ◆ Current probes with sensitivity of 1V/A over the frequency range from 9kHz to 30MHz, no antenna factor is needed
    ◆ Triple independent 2m diameter loops
    ◆ Manual switching unit for loop selection
    ◆ Usable with any brand CISPR 16-1-1 EMI receiver or spectrum analyzer
    ◆ Ten minutes to assembly and disassembly
    ◆ No screws
    ◆ Easy to store
    ◆ Calibration loop (optional)
    ◆ EUT support (optional)

     

    TECHNICAL SPECIFICATIONS
    Design: Fully compliant to CISPR 15 and CISPR 16-1-4 standards
    Frequency range: 9kHz÷30MHz
    Loops: Triple independent 2m diameter loops, switchable among X, Y, Z
    Loop selector: Manual switching unit
    Output impedance: 50Ω
    Connector: N female
    Operating temperature: 0° to 45°C
    Storage temperature: -20° to 70°C
    Dimensions: 2,6 x 2,1 x 2,1 m (height Z / width X / width Y)

     

    RELATED PRODUCTS
    • AFJ EMI RECEIVERS
    • FFT 3010 f=9kHz÷30MHz
    • R3030 f=9kHz÷300MHz

    Associated Downloads