Reliant EMC

York Reference Source - YRS03

The YRS03 is a multi-mode reference source capable of producing a broadband noise or comb output up to 6GHz.
• Selectable noise or comb output
- Flexibility across a range of applications
• Stable output
- Repeatable measurements
• 10 MHz to 6 GHz output
- Applications across a broad frequency
spectrum
• Compact and portable
- Comparisons between sites and
environments
• Battery powered
- No power or interconnecting cable effects
on measurements
 

York EMC Services YRS03

The YRS03 is a broadband noise and comb source that is capable of producing a continuous noise output or a comb of frequencies within the 10 MHz to 6 GHz range, with step size being selected by the user.
 
The noise generator enables observation of details over the full spectral range, while the comb generator allows for the reference signal output and noise floor to be viewed simultaneously.
For radiated operation the output can be attached to a selection of antennas available in a range of frequency coverage and types.
 
The YRS03 is an ideal source for carrying out checks on Open Area Test Sites (OATS) and fully or semi-anechoic chambers.
 
The YRS03 is compact and battery powered, allowing operation
as an electrically small source, which minimizes the effect of the YRS03 itself when characterizing the electromagnetic environment.
 
The YRS03 is housed in a metal enclosure so that it can be
mounted in direct contact with a metal ground plane as may be required by some tests.
 

Applications

  • Applications
    • Radiated and conducted measurement systems validation and verification
    • Reference source for:
    - Daily pre-test checks as required by the accreditation authorities e.g. ISO17025,
    DEFSTAN 59-411
    - Long-term performance monitoring
    - Cable position investigation
    - Investigation of screened room behavior
    - Characterization of filter performance
    - Cable loss measurements
    • Measuring amplifier gain and bandwidth
    • Spectrum analyzer/receiver pre-check
    • Investigation and characterization of different measurement environments such as OATS, fully- or semi-anechoic chambers
  •  

     

    YRS03KIT01 reference noise/comb source

    • Basic YRS03 reference noise/comb source kit.
    • Includes:
    • · YRS03 30 MHz to 6 GHz switchable noise/comb source
      · MCN03 monocone antenna (1 GHz to 6 GHz optimum)
      · Manual
      · 4 x "AA" alkaline cells
      · Case
      · CAL19 (output power from 30 MHz to 6 GHz measured using a spectrum analyzer, all modes)
      · Shipping Container 52x42x28cm, 5kg (Shipping Container with unit)

     

    YRS03KIT02 reference noise/comb source

    Includes:
    · YRS03 30 MHz to 6 GHz switchable noise/comb source
    · MCN03 monocone antenna (1 GHz to 6 GHz optimum)
    · MON03 monopole antenna (200 MHz to 1 GHz optimum)
    · TLM02 top-loaded monopole (30 MHz to 300 MHz optimum)
    · Manual
    · 4 x "AA" alkaline cells
    · Case
    · CAL19 (output power from 30 MHz to 6 GHz measured using a spectrum analyzer, all modes)
    · Shipping Container 52x42x28cm, 5kg (Shipping Container with unit)

     

    • Accessories

    • TLM01
      100 mm long top-loaded monopole antenna, 200 MHz to 1 GHz optimum. For CNE III, CNE V, CNE V+, CNE VI, YRS01, YRS02, YRS03
      TLM02
      270 mm long top-loaded monopole antenna, 30 MHz to 300 MHz optimum. For CNE III, CNE V, CNE V+, CNE VI, YRS01, YRS02, YRS03
      MON02
      Telescopic monopole antenna approx 1 m. For CNE III, CNE V, CNE V+, CNE VI, YRS01, YRS02
      MON03
      270 mm long monopole antenna, 200 MHz to 1 GHz optimum.  For CNE III, CNE V, CNE V+, CNE VI, YRS01, YRS02, YRS03
      MCN03
      120 mm diameter monocone antenna, 1 GHz to 6 GHz optimum. For CNE III, CNE V+, CNE VI and YRS03
      LSA03
      LISN adaptor with IEC type connector
      NIA01
      ISN adapter with 6-way RJ11/RJ14/RJ25 and 8-way RJ45 connector

     

    Shipping Container dimensions and weight information

    Shipping Container

    Weight (Container & Unit)

    52x42x28cm
    5kg
  •  
    Freight Documentation for all Repairs and Calibrations must included: “Import under IPR CPC 5100001 – Goods of UK origin returned for repair/calibration - Items are to be imported under IPR CPC 5100001 being goods of UK origin, temporarily returned for repair/recalibration”

     

    Associated Downloads

 

Request a Quote / Contact Us!

York EMC Servcies

Eurofins York Products