Reliant EMC

Comb Generator Emitter - CGE03

The Eurofins York Comb Generator Emitter 03 (CGE03) is a compact, battery powered, reference signal source that generates a broadband conducted output up to 40 GHz.
When used as a verification reference source, the known output allows unknowns within systems or components to be measured or calculated.
The CGE03 is supplied with a 50 Ω 2.9 mm output connector for direct connection to conducted test systems, or to an external antenna in order to generate test fields for evaluating radiated emission test systems.
The CGE03 harmonic steps can be switched between 900 MHz and 1 GHz as standard, allowing more frequency points to be measured than is possible with a fixed frequency source.
Features:
• Stable output
- Repeatable measurements
• 900 MHz to 40 GHz output
- Applications across a broad frequency spectrum
- Applicable to harmonics of high frequency systems
• Compact and portable
- Comparisons between sites and environments
• Battery powered
- No power or interconnecting cables affecting measurements
 
Applications:
• Reference source for:
- Daily pre-test verification checks if required by the accreditation authorities
- Long term performance monitoring
- Spectrum analyser / receiver pre-checks
• Characterisation of filter performance
• Cable loss measurements
• Measuring amplifier gain and bandwidth
• Radiated measurement system validation and verification (requires an additional antenna)
• Inter-laboratory test programs
• Proficiency test programs
 
Specifications:
• Frequency range 900 MHz to 40 GHz direct connection into a 50 Ω system 1 GHz to 26 GHz radiated using the optional MCN02 antenna • Step size 900 MHz or 1 GHz switchable
• Output connector 50 Ω 2.9 mm socket
• Temperature stability <2 dB, at an ambient temperature of 15 °C to 35 °C
• Time stability Typically <1 dB over a 12 month period
• Dimensions:
- CGE03C with battery pack – 76 mm diameter × 96 mm (102 mm incl. connector)
- CGE03C without battery pack – 76 mm diameter × 50 mm (56 mm incl. connector)
• Weight Approx 750 g (including battery)
• Power supply
- 5 V 2 AHr battery pack
- External input 5.00 V ± 0.25 V, 500 mA
• Operating time 4 hours typical with a fully charged battery pack
• Indicators Mode 1; 900 MHz steps. Mode 2; 1 GHz steps, incorrect power supply voltage
 
Calibration Options:
• CAL15 Conducted output power, 0 GHz to 40 GHz, measured using a spectrum analyser
• CAL10 Radiated field strength, 1 GHz to 26 GHz, measured at 3 m in a FAR using a spectrum analyser (CGE03C with monocone antenna only)
 
Standard Kits:
CGE03KIT01 - Standard CGE03C comb generator emitter (conducted output) kit.
Parts included:
• CGE03C comb generator emitter with 2.9mm socket output connector
• CAL15 - Standard conducted output power measurement , 0GHz to 40GHZ
 
CGE03KIT02 - Standard CGE03C comb generator emitter (conducted and radiated ouput) kit.
• CGE03C comb gernerator emitter with 2.9mm socket output connector.
• MCN02 – detachable monocone antenna
• CAL15 – conducted output power measurement, 0 GHz to 40 GHz

York EMC Services CGE03 Com Generator Emitter image

Accessories

   
MCN01
Detachable monocone antenna (1-18GHz optimum used with CGE01)
BP01
5V 2AH detachable battery pack

 

Shipping Container dimensions and weight information

Shipping Container

Weight (Container & Unit)

52x42x28cm
5kg

 

Associated Downloads

 

Request a Quote / Contact Us!
York EMC Services

Eurofins York Products