Reliant EMC

Schwarzbeck Accessories

Schwarzbeck Accessories
ACS 110 - Traveler Charger for Probes and Antennas
ACT 461G - Audio Coupling Transformer
BN 1701 - Buffer Network
BD 9501 - IEEE-488 Bus-Feed Through
CA 9607 - Universal Calibration Adapter for Current Clamps
CA 9608 - Universal Calibration Adapter
CAP 10 - 10 µF Capacitor for NNBM 8124. For airborne equipment
CAP 10 8226-2 - 10 μF capacitor for NNBL 8226-2 LISN and for military equipment
CCA - Product Transport Cases
CCC 9224 - Capacitive Coupling Clamp
CCC 9225 - Capacitive Coupling Plate
CISPR 17 Equipment - Transformers
CP 9610 - Current Sensor
CVP 9222 C - High Impedance Capacitive Voltage Probe
CVP 9222 - High Impedance Capacitive Voltage Probe
HPF - High Pass Filter
HPF 150 k - High Pass Filter
KU 9608 - Coaxial and Line Switch
SW 9602 - Current Transformer
SW 9603 - Current Transformer
SW 9605 - Current Transformer
SW 9606 - Current Injection Clamp
TF 130-150 - Test Fixture for Ford RI 130/ 150

 

ACS 110 Traveler Charger for Probes and Antennas
 · Charger for Probes and Antennas with built in with built in NiMH-batteries
ACT 461G - Audio Coupling Transformer
Audio coupling transformer for conducted audio frequency susceptibility tests as required by MIL STD 461G and other standards.
Frequency range 10 Hz - 250 kHz, 200 W, turn ratio 2:1.
Output and input: wing terminals.

 

BN 1701 Buffer Network 
Schwarzbeck BN 1701 Buffer network  (CISPR 17) 
· Buffer network  (CISPR 17)
 · Frequency range: 100 kHz - 30 MHz
 · max. 32 A
 
pdficon small Data Sheet BN1701

 

BD 9501 IEEE-488 Bus-Feed Through
 · IEEE-488 Bus-Feed through for flange mounting
(shielded rooms) (other feed throughs on request)
 
Data Sheet BD 9501
 
 
CA 9607 Universal Calibration Adapter for Current Clamps
Schwarzbeck CA 9607 Calibration Adapter 
· Universal calibration adapter for current clamps
 · test jig for Ferrites
 
Data Sheet CA 9607
 
 
CA 9608 Universal Calibration Adapter
Schwarzbeck CA 9608 Calibration Adapter 
·
Universal calibration adapter for e.g. the following current clamps:
 · R&S ESV-Z1, Prodyn, IT-050-1
 · length and height setable
 
Data Sheet CA 9608
 
CAP 10 10 µF Capacitor for NNBM 8124
Schwarzbeck CAP 10
· 10 µF Capacitor for NNBM 8124
· 500 V (AC)
· 400 Hz
· DEF STAN 59, DO 160
 
Schwarzbeck Calibration adapters for V-LISN (V-AMN) Data Sheet Schwarzbeck CAP 10 10uF Capacitor for NNBM LISN Data Sheet
 
CAP 10 8226-2 10 μF capacitor for NNBL 8226-2 LISN
Schwarzbeck CAP 10 8226-2 10uf Capacitor for NNBL 8226-2 500  AC 400 Hz
To be compliant to the standard MIL 461F (method CS 101-4 and CS 106-3) a 10 μF capacitor like the CAP 10 8226-2 has to be connected to the mains connectors of the LISN.

 

Schwarzbeck Calibration adapters for V-LISN (V-AMN) Data Sheet Schwarzbeck CAP 10 8226 2 10uF Capacitor for NNBL 88226 2 LISN Data Sheet

 

 
CCA Product Transport Cases
Schwarzbeck CCA for 9108A_9124_9177 
Schwarzbeck CCA
 · CCA product transport cases keep your equipment safe, at any time. During transport or for safe storage
 · Individual for your product
 · A combination of products in one case are possible
 · More information about CCA and some examples are
shown in the Data Sheet
 
pdficon small Data Sheet CCA
 
 
CISPR 17 Equipment
Schwarzbeck SY9223-17 Wideband Transformer
· Transformers
 · fixtures and adapters to measure filters
 · Ferrites and other passive components.
 · Detailed product list and data sheets on request.
 
Data Sheet CISPR 17 Equipment
 
CP 9610 - Current Sensor
The current sensor CP 9610 can measure up to 40 A in a frequency range from DC – 1 MHz. It is galvanically isolated and can withstand a maximum voltage of 210 VPK / VDC. The internal resistance of the conductive path is less than 3 mΩ, providing low power loss. The hall transducer is temperature compensated and allows high accuracy over temperature.

 

Frequency Range:
DC - 1 MHz
Output Connector:
 BNC (1 MΩ)
Current Sensing Range:
 -40 A - +40 A
Nominal conversion factor:
 50 mV/A
Internal Conductor Resistance:
 < 3 mΩ
Typical Output Error:
 ±3 %
Dimension:
 105 x 44 x 115 mm
Typical Operation Time:
 24 h
EUT Connector:
 Wing terminals
Power Supply:
 3.7 V, 2.6 Ah Lithium Ion
Weight:
 430 g

 

Schwarzbeck CP 9610 - Current Sensor Data Sheet

 

 
CVP 9222 High Impedance Capacitive Voltage Probe
Schwarzbeck CVP 9222 High Impedance Capacitive Voltage Probe 
Schwarzbeck CVP 9222 High Impedance Capacitive Voltage Probe
 · High Impedance Capacitive Voltage Probe according to to CISPR 22
 · EN 55022 C 1.3
 · Frequency range: 9 kHz - 100 MHz
 
Options:
 · Option ACS 110:Charger ACS 110 for CVP 9222
 · Option CAL 9222: Calibration Adapter for CVP 9222
 
pdficon small Data Sheet CVP 9222
 
CVP 9222 C High Impedance Capacitive Voltage Probe
Schwarzbeck CVP 9222 C High Impedance Capacitive Voltage Probe
Schwarzbeck CVP 9222 C High Impedance Capacitive Voltage Probe with Cable Holder Lid Open
 Schwarzbeck CVP 9222 C High Impedance Capacitive Voltage Probe with Cable Holder Lid Open Side View
 
High Impedance Capacitive Voltage Probe acc. to
CISPR 22
EN 55022 C 1.3
Frequency range: 9 kHz - 100 MHz
 
Options:
 · Option ACS 110: Charger ACS 110 for CVP 9222, CVP 9222 B and CVP 9222 C
 · Option CAL 9222 B: Calibration Adapter for CVP 9222, CVP 9222 B and CVP 9222 C
 
pdficon small Schwarzbeck CVP 9222 C High Impedance Capacitive Voltage Probe Data Sheet

 

 
HPF High Pass Filter
Schwarzbeck HPF High Pass Filter
 · High Pass Filter
 · 35 - 1000 MHz
 · Insertion loss at 27.12 MHz type 100 dB
 
Data Sheet HPF
 
 
HPF 150 k High Pass Filter
Schwarzbeck HPF 150 k High Pass Filter
The HPF is a passive LC-Filter with female N-connectors in shielded metal housing with very steep slope according to CISPR 16-1-1.
The main application is the elimination of noise below 150 kHz for conducted interference voltage measurements.
Particular features are high pulse load capacity and dielectric strength.

Specifications
Frequency Range
9 kHz - 30 MHz
Fundamental frequency:
 
150 kHz
Nominal impedance:
 
50 Ω
Continuous power:
 
100 W
Passband loss:
 
< 1.5 dB
Passband VSWR:
 
< 2
Stop band loss:
 
>50 dB @ ≤ 130 kHz
Housing material:
 
Aluminium
Housing dimensions: 
(with connector)
 
50 x 105 x 240 mm
Weight:
860 g
Connector:
 
2 x N female
 
 
Schwarzbeck HPF 150 k High Pass Filter Data Sheet

 

KU 9608 Coaxial and Line Switch
 · Coaxial and line switch for measurement of the attenuation of fluorescent lighting fittings
 
pdficon small Data Sheet KU9608
 
 
SW 9602 Current Transformer
 · Current Transformer
 · shielded
 · 0.01 - 200 MHz
 · Transfer Impedance: 1 Ohm for wires up to 6.5 mm
 
Data Sheet SW 9602
 
 
SW 9603 Current Transformer
 · Current Transformer
 · shielded
 · 9 kHz - 150 MHz
 · Transfer Impedance: 1 Ohm for wires up to 14 mm
 
Data Sheet SW 9603
 
 
TF 130-150 Test Fixture for Ford RI 130/ 150
 Schwarzbeck TF-130-150 Test Fixture for Ford RI 130-150 Per EMC-CS-2009
Schwarzbeck TF-130-150 Test Fixture for Ford RI 130-150 Per EMC-CS-2009
 · Test Fixture for Ford RI 130/ 150 Per EMC-CS-2009
 
Data Sheet TF 130-150
 
 
Request a Quote / Contact Us!
Schwarzbeck Mess-Elektronik

Schwarzbeck products