Reliant EMC

SchlÖder Product List

Model #
Product Description
IEC / EN 61000 - 4 - 2 ESD
 
SESD 216
ESD generator 10 kV CON / 16,5 kV AIR acc. to IEC 61000-4-2, 150 pF / 330 ohm 
SESD 230
ESD generator 30 kV CON / 30 kV AIR acc. to IEC 61000-4-2, 150 pF / 330 ohm 
SESD 30000
ESD generator 30 kV CON / 30 kV AIR acc. to IEC 61000-4-2 and ISO 10605/2008, 150 pF/ 330 ohm, mechanical polarity module, includes factory calibration for 150 pF/330 ohm 
SESD 30000 P
ESD generator 30 kV CON / 30 kV AIR acc. to IEC 61000-4-2 and ISO 10605/2008, 150 pF/ 330 ohm, electronic polarity module, includes factory calibration for 150 pF/330 ohm 
SESD 30000 A
ESD generator 30 kV CON / 30 kV AIR acc. to IEC 61000-4-2 and ISO 10605/2008, 150 pF/ 330 ohm, electronic polarity module, includes factory calibration for 150 pF/330 ohm, battery and main operation, includes factory calibration for 150 pF/330 ohm 
SESD 30 S 100
Control software ESD, with optical interface and fiber optic cable 10m. For the generators SESD 216, SESD 230, SESD 30000 
KAL SESD 30000-4
ISO 10605 calibration (4 impedances – 202 values), before delivery of a new ESD generator, if a customer purchase the SESD 30000 /SESD 30000P /SESD 3000A with the modules 330 pF and 2000 ohm for automotive application. 
SESD 30 C 50
Capacity module 50 pF 
SESD 30 C 100
Capacity module 100 pF 
SESD 30 C 150
Capacity module 150 pF 
SESD 30 C 200
Capacity module 200 pF 
SESD 30 C 250
Capacity module 250 pF 
SESD 30 C 300
Capacity module 300 pF 
SESD 30 C 330
Capacity module 330 pF 
SESD 30 C 500
Capacity module 500 pF 
SESD 30 C 680
Capacity module 680 pF 
SESD 30 C 1000
Capacity module 1000 pF 
SESD 30 R 0
Resistor module 0 ohm,only for AIR discharge,C max 330 pF 
SESD 30 R 50
Resistor module 50 ohm 
SESD 30 R 100
Resistor module 100 ohm 
SESD 30 R 150
Resistor module 150 ohm 
SESD 30 R 200
Resistor module 200 ohm 
SESD 30 R 250
Resistor module 250 ohm 
SESD 30 R 330
Resistor module 330 ohm 
SESD 30 R 500
Resistor module 500 ohm 
SESD 30 R 560
Resistor module 560 ohm 
SESD 30 R 1000
Resistor module 1000 ohm 
SESD 30 R 1500
Resistor module 1500 ohm 
SESD 30 R 2000
Resistor module 2000 ohm 
SESD 30 R 5000
Resistor module 5000 ohm 
SESD 30 P 200
Electronic polarity module 
SESD 30 M 200
Fast discharge module, rise time < 400 ps 
SESD 30 T 630
Balancer for ESD 
SESD 3036
Hook on the generator - for hanging on a balancer. Before delivery of a new ESD generator, if a customer purchase a new ESD generator 
SESD 3036
Hook on the generator - for hanging on a balancer. Mounting a hook for an existing customer SESD xxx generator 
SESD 30 Z 01
BNC trigger output, instead of a trigger input 
SESD 30 Z 02
Special module with HV cable 1m long (instead of test tip) 
SESD 3021
Test tip (metal part) Contact discharge, 30 kV, standard 
SESD 3025
Test tip (metal part) Air discharge, 30 mm half ball 
SESD 3026
Test tip (metal part) “CON” with spring contact, 50 mm long 
SESD 3027
Test tip (metal part) “CON” with spring contact, 70 mm long 
SESD 30 MOD-1
HBM (Human Body Model) module 5 ns (100 pF/1500 ohm), 100 pF module and 330 ohm module are needed - the 1500Ω are obtained by the HBM module + 330 ohm. Included plot. 
SESD 30 MOD-1-U2
Modification of an existing SESD 30000 for option HBM (MOD-1) 
SESD 30 MOD-3-U1
Modification of an existing SESD 30000 for automatic absorbing. Calibration has to be quoted additionally. 
SESD 231
Discharge return cable, 2m long 
SESD 271
VCP – vertical coupling plate, include earth cable SESD 272 
SESD 272
Earth cable include 2 x 470 kohm resistor, 2 m long 
SESD 8800- 4
ESD calibration set 2 ohm (4 GHz), traceable to National standard. Necessary acc. to the new revision of the standard IEC 61000-4-2. Included accredited calibration. 
ATT-20
Additional attenuator 20 dB for the SESD 8800-4 
SESD 2910
ESD test system, 30 kV for testing electro explosive devices acc. EN 13763-13- Basic unit, includes electronic polarity module, RS 232 interface. 
SESD 29 R 05
Resistor module 0,5 ohm 
SESD 29 R 2
Resistor module 2 ohm 
SESD 29 R 5
Resistor module 5 ohm 
SESD 29 R 10
Resistor module 10 ohm 
SESD 29 R 20
Resistor module 20 ohm 
SESD 29 R 150
Resistor module 150 ohm 
SESD 29 R 330
Resistor module 330 ohm 
SESD 29 R 500
Resistor module 500 ohm 
SESD 29 R 2000
Resistor module 2000 ohm 
SESD 29 R 5000
Resistor module 5000 ohm 
SESD 29 C 150
Capacity modules 150 pF 
SESD 29 C 200
Capacity modules 200 pF 
SESD 29 C 300
Capacity modules 300 pF 
SESD 29 C 330
Capacity modules 330 pF 
SESD 29 C 470
Capacity modules 470 pF 
SESD 29 C 500
Capacity modules 500 pF 
SESD 29 C 1000
Capacity modules 1000 pF 
SESD 29 C 1500
Capacity modules 1500 pF 
SESD 29 C 2000
Capacity modules 2000 pF 
SESD 29 C 2500
Capacity modules 2500 pF 
SESD 29 C 3000
Capacity modules 3000 pF 
SESD 29 C 3500
Capacity modules 3500 pF 
SESD 29 C 5000
Capacity modules 5000 pF 
SESD 2990
Transport case for max. 12 modules 
IEC / EN 61000 - 4 - 4 Burst
 
SFT 1400
Burst generator 125 kHz, 5 kV, acc. to IEC 61000-4-4 
SFT 1420
Burst generator 2 MHz, 4.8 kV acc. to IEC 61000-4-4 
SFT 415
Capacity clamp to test I/O leads, in conformity with IEC 61000-4-4, includes the high-voltage cable. 
SFT 415-1
Capacity clamp to test I/O leads, in conformity with IEC 61000-4-4 with special protection against touch, includes the high voltage cable. 
SFT 415-CS
Calibration Set for calibration of the capacity coupling clamp acc. IEC 61000-4-4, 2012 
SFT 450-1
50 Ohm Attenuator for calibration SFT 415; 54 dB, conform divider 500:1 at 50 ohm termination (scope input) 
SFT 450-2
1000 Ohm Attenuator for calibration SFT 415 and SFT 1400, 1420; 60 dB, conform divider 1000:1 at 50 ohm termination (scope input) 
SFT 450-Set
50 Ohm and 1000 Ohm Attenuator for calibration the SFT 415 and SFT 1400, SFT 1420 
SFT 470
Probe set for Burst generator, to create short time magnetic fields 
IEC / EN 61000 - 4 - 5 Surge
 
CWG 1500
Surge generator according to IEC 61000-4-5, max. 4,4 kV 
CWG 520
3-phase coupling network, 400 V / 4 x 16 A for burst and surge 
CWG 520 - 550
3-phase coupling network, max. 550 V / 4 x 16 A for burst and surge 
CWG 523
3-phase coupling network, 400 V / 4 x 32 A for burst and surge 
CWG 523- 550
3-phase coupling network, max. 550 V / 4 x 32 A for burst and surge 
CWG 524
3-phase coupling network, 400 V / 4 x 60 A for burst and surge 
CWG 524 - 550
3-phase coupling network, max. 550 V / 4 x 60 A for burst and surge 
CWG 524-B
3-phase coupling network, 400 V / 4 x 60 A, for burst coupling only 
CWG 1525
Coupling network, 2 unshielded symmetrical data lines (field bus, interconnectin lines), 1 A, max. 50V AC/DC, coupling via gas arrestors 
CWG 1526-4
Coupling network, 0,5uF / 40 Ohm, 2 unshielded unsymmetrical interconnection lines, 4A/ 240 VAC, 120 VDC 
CWG 1526-10
Coupling network, , 2 unshielded unsymmetrical interconnection lines, 10A/ 240 VAC, 120 VDC 
CWG 1528
Coupling network, 0,5uF / 40 Ohm, 4 unshielded unsymmetrical interconnection lines, 6 A, 3 x 250 VAC, max. 120 VDC; Remote control RS 232 
CWG 550
External 18 μF capacitor within a housing, acc. IEC 61000-4-5 Ed.3.0, 2014; max. 250 VAC, max. 400 VDC, max. pulse voltage 4,4 kV, include HV cable 35 cm, for verification of the Surge pulse / tests to cable shields. 
CWG 553
0,5 μF capacitor + 40 Ohm resistor within a housing, acc. IEC 61000-4-5 Ed.3.0, 2014; max. 250 VAC, max. 400 VDC, max. pulse voltage 4,4 kV, include HV cable 90 cm, for verification of the Surge pulse / tests to cable shields. 
CWG 554
External 18 μF and 9 μF capacitor and 10 ohm within a housing, acc. IEC 61000-4-5 Ed.3.0, 2014, max. 550 VAC, 1200 VDC, max. pulse voltage 6,0 kV, for Surge tests without coupling networks to cable shields and verification of the Surge pulse. Includes HV cable, to connect to the CWG 1500 
CDG 6000-DC
Conducted RF generator, acc. IEC 61000-4-6, Ed.4.0, 100 kHz – 300 MHz, amplifier 25W for 10 V (15 V) with 80% AM (without 6 dB), - built-in directional coupler 
CDG 6000
Conducted RF generator, acc. IEC 61000-4-6, Ed.4.0, 100 kHz – 300 MHz, amplifier 25W for 10 V (15 V) with 80% AM (without 6 dB), - without directional coupler 
CDG 6000-75-DC
Conducted RF generator, acc. IEC 61000-4-6, Ed.4.0, 100 kHz – 300 MHz, amplifier 75W for 30 V (40 V) with 80% AM (without 6 dB), - built-in directional coupler 
CDG 6000-75
Conducted RF generator, acc. IEC 61000-4-6, Ed.4.0, 100 kHz – 300 MHz, amplifier 75W for 30 V (40 V) with 80% AM (without 6 dB), - without directional coupler 
CDG 6000-75-DC_10
Conducted RF generator, acc. IEC 61000-4-6, Ed.4.0, 10 kHz – 250 MHz, amplifier 75W for 30 V (40 V) with 80% AM (without 6 dB), - built-in directional coupler 
CDG 6000-75_10
Conducted RF generator, acc. IEC 61000-4-6, Ed.4.0, 10 kHz – 250 MHz, amplifier 75W for 30 V (40 V) with 80% AM (without 6 dB), - without directional coupler 
CDG 6050
6 dB Attenuator, 20W, for test level max. 20V 
CDG 6050-100W
6 dB Attenuator, 100W 
Coupling networks - Calibration adapters required Special CDNs upon requirement
 
CDN L1-16
1 line, 250VAC, 16A, 150 kHz – 230 MHz, 4mm MC jack, black 
CDN M1
ground cable PE, 250 VAC, 150 kHz–230 MHz, 4mm jack, gn/yellow 
CDN M1_10
ground cable PE, 250 VAC, 10 kHz – 230 MHz, 4mm jack, gn/yellow 
CDN M2-16
2 lines L + N, 250 VAC, 16 A, 150 kHz – 300 MHz 
CDN M2-16_10
2 lines L + N, 250 VAC, 16 A, 10 kHz – 230 MHz 
CDN M2-32
2 lines L + N, 250 VAC, 32 A, 150 kHz – 230 MHz 
CDN M2-32 HV
2 lines L + N, 600 VAC, 32 A, 150 kHz – 230 MHz 
CDN M2-63 HV
2 lines L + N, 600 VAC, 63 A, 150 kHz – 80 MHz 
CDN M2-100 HV
2 lines L + N, 600 VAC, 100 A, 150 kHz – 80 MHz 
CDN M2+M3-16
2 + 3 lines, switchable, 250 VAC, 16 A, 150 kHz – 300 MHz 
CDN M2+M3-16_10
2 + 3 lines, switchable, 250 VAC, 16 A, 10 kHz – 230 MHz 
CDN M2+M3-32
2 + 3 lines, switchable, 250 VAC, 32 A, 150 kHz – 230 MHz 
CDN M3-16
3 lines L + N + PE, 250 VAC, 16 A, 150 kHz – 300 MHz 
CDN M3-L16
3 lines 3 x L, 250 VAC, 16 A, 150 kHz – 230 MHz 
CDN M3-32
3 lines L + N + PE, 250 VAC, 32 A, 150 kHz – 230 MHz 
CDN M3-L32
3 lines 3 x L, 250 VAC, 32 A, 150 kHz – 230 MHz 
CDN M3-L32_10
3 lines 3 x L, 250 VAC, 32 A, 10 kHz – 230 MHz 
CDN M3-LN32
3 lines L1 + L2 + N, 250 VAC, 32 A, 150 kHz – 230 MHz 
CDN M3-32 HV
3 lines L + N + PE, 600 VAC, 32 A, 150 kHz – 80 MHz 
CDN M3-63 HV
3 lines L + N + PE, 600 VAC, 63 A, 150 kHz – 80 MHz 
CDN M3-100 HV
3 lines L + N + PE, 600 VAC, 100 A, 150 kHz – 80 MHz 
CDN M3-L100 HV
3 lines, 3 x L 600 VAC, 100 A, 150 kHz – 80 MHz 
CDN M4-16
4 lines 3 x L, 1 x PE, 250 VAC, 16 A, 150 kHz – 230 MHz 
CDN M4-N16
4 lines 3 x L, 1 x N, 250 VAC, 16 A, 150 kHz – 230 MHz 
CDN M4-32
4 lines 3 x L, 1 x PE, 250 VAC, 32 A, 150 kHz – 230 MHz 
CDN M4-N32
4 lines 3 x L, 1 x N, 250 VAC, 32 A, 150 kHz – 230 MHz 
CDN M4-32 HV
4 lines 3 x L, 1 x PE, 600 VAC, 32 A, 150 kHz – 80 MHz 
CDN M4-32_10
4 lines 3 x L, 1 x PE, 250 VAC, 32 A, 10 kHz – 230 MHz 
CDN M4-N63 HV
4 lines 3 x L, 1 x N, 600 VAC, 63 A, 150 kHz – 80 MHz 
CDN M4-63 HV
4 lines 3 x L, 1 x PE, 600 VAC, 63 A, 150 kHz – 80 MHz 
CDN M4-100 HV
4 lines 3 x L, 1 x PE, 600 VAC, 100 A, 150 kHz – 80 MHz, incl. cable 3m with 2 plugs. 
CDN M4-N100 HV
4 lines 3 x L, 1 x N, 600 VAC, 100 A, 150 kHz – 80 MHz, incl. cable 3m with 2 plugs. 
CDN M5-16
5 lines 3 x L, 1 x N, 1 x PE, 250 VAC, 16 A, 150 kHz – 230 MHz 
CDN M5-32
5 lines 3 x L, 1 x N, 1 x PE, 250 VAC, 32 A, 150 kHz – 230 MHz 
CDN M5-32 HV
5 lines 3 x L, 1 x N, 1 x PE, 600 VAC, 32 A, 150 kHz – 80 MHz 
CDN M5-32 VHV
5 lines 3 x L, 1 x N, 1 x PE, 1000 VAC, 32 A, 150 kHz – 80 MHz 
CDN M5-63 HV
5 lines 3 x L, 1 x N, 1 x PE, 600 VAC, 63 A, 150 kHz – 80 MHz 
CDN M5-100 HV
5 lines 3 x L, 1 x N, 1 x PE, 600 VAC, 100 A, 150 kHz – 80 MHz 
CDN S 1-75
1 screened line, 75 Ohm connector BNC, 150 kHz – 230 MHz 
CDN S 1
1 screened line, connector BNC, 150 kHz – 230 MHz 
CDN S 1_10
1 screened line, connector BNC, 10 kHz – 230 MHz 
CDN S 2
2 screened lines, connector XLR, 150 kHz – 230 MHz 
CDN S 2_10
2 screened lines, connector XLR, 10 kHz – 230 MHz 
CDN S 3_10
3 screened lines, connector XLR, 10 kHz – 230 MHz 
CDN S 4
screened lines, connector XLR, 5 pole, 150 kHz – 230 MHz 
CDN S 8
screened lines, connector 8 pole Mini DIN, 150 kHz – 230 MHz 
CDN S 9
screened lines, connector 9-pol SUB-D, 150 kHz – 230 MHz 
CDN S 9_10
screened lines, connector 9-pol SUB-D, 10 kHz – 230 MHz 
CDN S 15
screened lines, connector 15-pol SUB-D, 150 kHz – 230 MHz 
CDN S 25
screened lines, connector 25-pol SUB-D, 150 kHz – 230 MHz 
CDN S K75-BNC
Screened lines, for coaxial-cable 75 Ohm, BNC 150 kHz – 230 MHz 
CDN AF 2
2 unscreened non balanced lines, terminal clamp, 150kHz – 300MHz 
CDN AF 2-MC
2 unscreened non balanced lines, 4mm MC jacks,150kHz – 300MHz 
CDN AF 2-MC_10
2 unscreened non balanced lines, 4mm MC jacks, 10kHz – 230MHz 
CDN AF 3
3 unscreened non balanced lines, terminal clamp, 150kHz – 230MHz 
CDN AF 3-MC
3 unscreened non balanced lines, 4mm MC jacks,150kHz – 230MHz 
CDN AF 3-MC_10
3 unscreened non balanced lines, 4mm MC jacks, 10kHz – 230MHz 
CDN AF 4
4 unscreened non balanced lines, terminal clamp, 150kHz – 230MHz 
CDN AF 4_10
4 unscreened non balanced lines, terminal clamp, 10 kHz – 230MHz 
CDN AF 4-MC
4 unscreened non balanced lines, 4mm MC jacks, 150kHz – 230MHz 
CDN AF 4-MC_10
4 unscreened non balanced lines, 4mm MC jacks, 10kHz – 230MHz 
CDN AF 5-MC
5 unscreened non balanced lines, 4mm MC jacks, 150kHz – 230MHz 
CDN AF 5-MC_10
5 unscreened non balanced lines, 4mm MC jacks, 10kHz – 230MHz 
CDN AF 8
8 unscreened non balanced lines, terminal clamp, 150kHz – 230MHz 
CDN AF 8_10
8 unscreened non balanced lines, terminal clamp, 10kHz – 80MHz 
CDN AF 8-MC
8 unscreened non balanced lines, 4mm MC jacks, 150kHz – 80MHz 
CDN AF 8-MC_10
8 unscreened non balanced lines, 4mm MC jacks, 10kHz – 80MHz 
CDN AF 8-SUBD_10
8 unscreened non balanced lines, 4mm SUB-D9, 10kHz – 230MHz 
CDN AF 12 SUB-D
12 unscreened non balanced lines, SUB-D15, 150kHz – 230MHz 
CDN T 2
2 unscreened balanced lines, terminal clamp, 150 kHz – 230 MHz 
CDN T 2_10
2 unscreened balanced lines, terminal clamp, 10 kHz – 80 MHz 
CDN T 4
4 unscreened balanced lines, terminal clamp, 150 kHz – 230 MHz 
CDN T 4_10
4 unscreened balanced lines, terminal clamp, 10 kHz – 80 MHz 
CDN T 8
8 unscreened balanced lines, terminal clamp, 150 kHz – 230 MHz 
CDN RJ 11
unscreened lines, 6 pins, RJ11 connector, 150 kHz – 230 MHz 
CDN RJ 45
unscreened lines, 8 pins, RJ45 connector, 150 kHz – 230 MHz 
CDN RJ 45S
screened lines, 8 pins, screened RJ45 connector, 150 kHz-230 MHz 
CDN RJ 45S_10
screened lines, 8 pins, screened RJ45 connector, 10 kHz-230 MHz 
CDN HDMI
screened lines, 19 pins, screened HDMI connector, 150kHz-230MHz, HDMI 1.3a 
CDN Firewire
CDN for IEEE 1394 units, 6 pol, Firewire jack, 150 kHz - 230 MHz 
CDN CAN-BUS L4
CDN for CAN-BUS, 9 pol SUB-D socket, 150 kHz - 230 MHz 
CDN CAN-BUS L5
CDN for CAN-BUS, 9 pol SUB-D socket, 150 kHz - 230 MHz 
CDN USB-C
CDN for central USB units, 8 pins connector, 150 kHz - 230 MHz, EUT side: USB-B -> square, AE side: USB-A -> flat 
CDN USB-C_10
CDN for central USB units, 8 pins connector, 10 kHz-230 MHz, EUT side: USB-B -> square, AE side: USB-A -> flat 
CDN USB-P
CDN for periphery USB units, 8 pins connector, 150 kHz-230 MHz, EUT side: USB-A -> flat, AE side: USB-B -> square 
CDN USB-P_10
CDN for periphery USB units, 8 pins connector, 10 kHz-230 MHz, EUT side: USB-A -> flat, AE side: USB-B -> square 
CDN USB-3.0
CDN for USB 3.0, 150 kHz-230 MHz, EUT side: USB-A -> flat, AE side: USB-A -> flat 
CDN D 100
100 ohm resistor for direct injection, connectors: BNC / alligator clip 
CDNs for Emissions Testing
 
CDN M2-16_9K EMI
2 lines L + N, for emissions testing, 250 VAC, 16A, 9 kHz – 300 MHz 
CDN M3-16_9K EMI
3 lines L+N+PE, for emissions testing, 250 VAC, 16A, 9 kHz–300MHz 
Calibration material
 
CDG A 3100
Mounting plate include 50/150 ohm passage and 50 ohm termination 
CDG 3110
100 Ohm resistor (50/150 ohm passage) BNC to BNC 
CDG A 3101
Calibration adaptor for CDN M3, M2, M1, L1 – 16A / 32A 
CDG A 3107
Calibration adaptor for CDN M5/M4-16/32A / AF5/AF4-MC (AE-port) 
CDG A 3128
Calibration adaptor for CDN M5/M4-16/32A / AF5/AF4-MC (EUTport) 
CDG A 3125
Calibration adaptor for CDN M3, M2, 63A 
CDG A 3126
Calibration adaptor for CDN M3, M2, 100A 
CDG A 3115
Calibration adaptor for CDN M5, M4, 63A 
CDG A 3116
Calibration adaptor for CDN M5, M4, 100A 
CDG A 3102
Calibration adaptor for CDN AF 2 
CDG A 3101
Calibration adaptor for CDN AF 2-MC 
CDG A 3108
Calibration adaptor for CDN AF 3 
CDG A 3101
Calibration adaptor for CDN AF 3-MC 
CDG A 3108
Calibration adaptor for CDN AF 4 
CDG A 3107
Calibration adaptor for CDN AF 5/AF4-MC (AE-port) 
CDG A 3128
Calibration adaptor for CDN AF 5/AF4-MC (EUT port) 
CDG A 3110
Calibration adaptor for CDN AF 8 
CDG A 3114
Calibration adaptor for CDN AF 8-MC 
CDG A 3143
Calibration adaptor for CDN AF 12-SUBD 
CDG A 3103
Calibration adaptor for CDN S 1 
CDG A 3104
Calibration adaptor for CDN S 2 
CDG A 3130
Calibration adaptor for CDN S 4 
CDG A 3129
Calibration adaptor for CDN S 8 
CDG A 3105
Calibration adaptor for CDN S 9 
CDG A 3113
Calibration adaptor for CDN S 15 
CDG A 3106
Calibration adaptor for CDN S 25 
CDG A 3144
Calibration adaptor for CDN S K75-BNC 
CDG A 3111
Calibration adaptor for CDN T2 
CDG A 3112
Calibration adaptor for CDN T4 
CDG A 3109
Calibration adaptor for CDN T8 
CDG A 3117
Calibration adaptor for CDN RJ 45 S 
CDG A 3118
Calibration adaptor for CDN RJ 45 
CDG A 3120
Calibration adaptor for CDN RJ 11 
CDG A 3121
Calibration adaptor for CDN USB-C (also USB 3.0C) 
CDG A 3122
Calibration adaptor for CDN USB-P (also USB 3.0P) 
CDG A 3123
Calibration adaptor for CDN HDMI 
CDG A 3127
Calibration adaptor for CDN Firewire 
CDG A 3131
Calibration adaptor for CDN CAN-BUS, 9-pol SUB-D male and CDN AF 8-SUBD_10 
Coupling clamps
 
CDN DCL-20
Decoupling clamp for immunity, acc. IEC 61000-4-6, 100 kHz – 1000 MHz, cable diameter max. 20mm. 
CDN EMCL-20
EM clamp acc. to /EC/EN 61000-4-6 incl. calibration kit and factory calibration, traceable, cable diameter max. 20 mm 
CDN EMCL-35
EM clamp acc. to /EC/EN 61000-4-6 incl. calibration kit and factory calibration, traceable, cable diameter max. 35 mm 
CDN-EMCL-NW_10
Matching network 10 kHz – 150 kHz, for using EMCL 20 from 10 kHz to 150 kHz 
KAL SET EMCL
Calibration set for EMCL, acc. IEC 61000-4-6, Ed. 4.0, 2014 
IEC / EN 61000 - 4 - 8 / EN 55103 / MIL STD / ISO DC - 250 kHz
 
MGA 1033
Magnetic field analyzer and generator acc. to EN 55103 + IEC 6100-4-8 + MIL-STD-461 E/F, DC-250 kHz, Amplifier 50V / 16A 
MGA 1034_16-SYS
Complete Test-System for Magnetic field tests acc. ISO 11452-8, MIL-STD-461 E/F and other – incl. compensation board and Triax Coil MGA_HCST_50-28 for magnetic fields until 1000 A/m at 1000 Hz, DC – 250 kHz, Amplifier 50V / 16A 
MGA_RLS 133
Radiating / Loop sensor 133 mm acc. to EN 55103-2, incl. 3m cable 
MGA_RL 120
Radiating loop 120 mm acc. to MIL-STD-461E / RS101, 3m cable 
MGA_BC-500
Radiating loop 50 cm, acc. to EN 55103-2, item A 3.1 
MGA_LS 040
Loop sensor 40 mm acc. to MIL-STD-461E / RE101, incl. 3m cable 
MGA_LS 133
Loop sensor 133 mm acc. to MIL-STD-461E / RE101, 3m cable 
MGA_B1
Test adapter acc. to EN 55103-2, Fig. B1 
MGA_B2
Calibration network acc. to EN 55103-2, Fig. B2 
MGA_B4
Current transducer acc. to EN 55103-2, Fig. B4 
MGA_HCS_100-60
Helmholtz coil 1-axis (50 kHz) 1,00x1,00m, distance 0,60m 
MGA_HCS_125-75
Helmholtz coil 1-axis (50 kHz) 1,25x1,25m, distance 0,75m 
MGA_HCST_50-28
Helmholtz coil 3-axis (50 kHz) 0,5 x 0,5m, distance 0,28m 
MGA_HCS_50-28
Helmholtz coil 1-axis (50 kHz) 0,5 x 0,5m, distance 0,28m 
MGA_CT-50A
Coupling transformer acc. MIL-STD-461 CS 101 
MGA_ISS-19
Coupling transformer for tests acc. DO160, Sec. 19 (19.3.1; 19.3.2; 19.3.3), in combination with MGA 1033 
MGA_SO_CE101
Software plug-in MIL-STD-461E / CE101 
MGA_SO_CS101
Software plug-in MIL-STD-461E / CS101 
MGA_SO_CS109
Software plug-in MIL-STD-461E / CS109 
MGA_SO_4-16
Software plug-in EN 61000-4-16 
IEC / EN 61000 - 4 - 16 Immunity DC – 150 kHz
 
PGA 1240-5
Power Generator DC – 300 kHz; +/-50V; +/-5A, also for the continuous disturbances acc. IEC 61000-4-16.
PGA 1240-16
Power Generator DC – 300 kHz; +/-50V; +/-16 A
PGA 1240-PSG 300
Option “External voltage-source”, input for phase-triggering of an external voltage-source, 50 ohm output, for the short-term tests up to 300V. Option instead of PGA 1330.
PGA 1330
Immunity generator for short-term tests up to 300 V, with 50 ohm serial resistor to the output
IT - 06
Isolation transformer 6 A
IT - 16
Isolation transformer 16 A
CN M2-AC-32
Coupling network for 2 lines 250 VAC, 15 Hz – 150 kHz
CN M2-DC-32
Coupling network for 2 lines 250 VDC
CN M3-AC-32
Coupling network for 3 lines 250 VAC, 15 Hz – 150 kHz
CN M3-DC-32
Coupling network for 3 lines 250 VDC
CN M4-AC-32
Coupling network for 4 lines 250 VAC, 15 Hz – 150 kHz
CN M5-AC-32
Coupling network for 5 lines 250 VAC, 15 Hz – 150 kHz
CN 1240-32
Coupling network switchable M2, M3, M4, M5, 32A, 250 V AC+DC, 15 Hz – 150 kHz
CN 1240-125
Coupling network switchable M2, M3, M4, M5, 125A, 250 V AC+DC, 15 Hz – 150 kHz
CN M2+M3-32-HV
CN for 2 and 3 lines, 32A, 520 VAC / 620 VDC, Housing 4 HE
CN AF 2
CN for 2 unsymmetrical, unshielded lines, DC, 15 Hz – 150 kHz 
CN AF 4
CN for 4 unsymmetrical, unshielded lines, DC, 15 Hz – 150 kHz 
CN AF 4 
CN for 4 unsymmetrical, unshielded lines, DC, 15 Hz – 150 kHz with 4mm MC banana plugs 
CN AF 8
CN for 8 unsymmetrical, unshielded lines, DC, 15 Hz – 150 kHz
CN T 2
CN for 2 symmetrical, shielded data lines, DC, 15 Hz – 150 kHz
CN T 4
CN for 4 symmetrical, shielded data lines, DC, 15 Hz – 150 kHz
CN T 8
CN for 8 symmetrical, shielded data lines, DC, 15 Hz – 150 kHz
CN RJ 45
CN for unsymmetrical, unshielded RJ45, DC, 15 Hz – 150 kHz
CN ITU-T
CN acc. ITU - Fig.1/K 54, for Telecom lines
IEC / EN 61000 - 4 - 11 and - 4 - 29 Voltage interruption and Voltage dips
 
VIS 1700_1
Voltage interruption simulator according to IEC 61000-4-11, AC and DC ramp function, includes factory calibration VIS 1700_1 
VIS 740
Step transformer 16,0 A for voltage dips, AC using only, 0%, 40%, 70%, 80% - necessary to reach the requirement acc. IEC 61000-4-11 (should also quote KAL VIS 740) 
KAL VIS 740
Additional cost for factory calibration of the step transformer. Before delivery of a new VIS 740, if a customer orders the VIS 1700_1 and VIS 740 
RF - Power Amplifier
 
PA 1020-25-250
RF broadband power amplifier, 25 W, 100 kHz – 250 MHz 
PA 1020-75-300
RF broadband power amplifier, 75 W, 100 kHz – 300 MHz 
PA 1020-75-400
RF broadband power amplifier, 75 W, 100 kHz – 400 MHz 
PA 1020-75-250
RF broadband power amplifier, 75 W, 10 kHz – 250 MHz 
PA 1020-180-400
RF broadband power amplifier, 180 W, 1 MHz – 400 MHz 
FNN Chapter 3.7.1 Rules (Electricity Meters)
 
PG01-2000
Pulse generator 0,1μs/2000μs, 10 kV acc. FNN rules 
IEEE 644
 
CAL 1250
Generator of magnetic fields with 3 channel generator / amplifier for calibration 50 / 60 Hz. 
Additions
 
EMV-SOFT
Control software (MS-Windows?) for Schloeder EMC generators (Burst, Surge, Voltage interruption, 3-phase coupling networks) 

 

 

Request a Quote / Contact Us!

Schlöder
 

SchlÖder Product Line

Schlöder Company Information
 
Schlöder ESD Simulators
EMC Generators / Measurement Systems
Coupling Networks for Burst & Surge
Accessories
Signal Generator SG 0282
 
Standards

Reliant EMC Product Lines