Reliant EMC

High Voltage Dividers

High Voltage Dividers
HVM 2015 High Voltage Measurement
HVT-RCR Broadband High Voltage Divider Series (HVT 10-160 RCR)
PVD 10-2 Pulse Voltage Divider
PVD 10-3 Pulse Voltage Divider
SCK 105 Surge Calibration Kit
BCK 400 F Burst Calibration Kit

 

The High voltage divider HVT 2015 is a state-of-the-art measuring
equipment with excellent high-frequency transmission characteristics. The high-voltage impedance consists of a precise metal film resistor and a high-voltage capacitor with series
damping resistor in parallel. The measuring cable with the termination network is an essential part of the divider. The
termination network can be adjusted for an oscilloscope input impedance of 1 MΩ // 10 - 30 pF.
 
 
HVM 2015 High Voltage Measurement
HVM 2015 High voltage divider

 

Summary:
• High Voltage (HV) measurement equipment
• measuring up to 10 kV
• optional up to 20 KV
• with ext. HVT: up to 300 kV
 
The high voltage measurement instrument HVM 2015 consist of a measuring amplifier for universal use with a digital touch display, a built-in high-voltage divider for direct measurement up to 10 kV / optional 20 KV and an external input for an external high voltage divider, HVT 2015, measurement and display of voltages up to 300 kV. The HVM 2015 is designed for measuring AC and DC voltages and allows in addition measurement of the peak value of lightning and switching pulse voltages.

 

 

HVT-RCR Broadband High Voltage Divider Series (HVT 10-160 RCR)
HVT-RCR Broadband high voltage divider series (HVT 10-160 RCR)

 

Summary:
• Broadband high voltage dividers
• Very good accuracy
• High bandwidth, low rise time
• Pulse Fidelity
• Long term stability
 
The Broadband high-voltage dividers series HVT (Models 10-160) RCR are state-of-the-art measuring equipment with excellent high-frequency transmission characteristics. The high-voltage impedance consists of a precise metal film resistor and a high-voltage capacitor with series damping resistor in parallel. The measuring cable with the termination network is an essential part of the divider. The termination network can be adjusted for an oscilloscope input impedance of 1 MΩ // 10 - 30 pF.
 
AFJ DDA55 Click Analyser Data Sheet HVT-RCR Broadband high voltage divider series (HVT 10-160 RCR) Data Sheet
 
 
PVD 10-2 Pulse Voltage Divider
PVD 10-2 Pulse Voltage Divider

 

Summary:
• Pulse Voltage Divider
• Input voltage: 10 kV
• Bandwidth: 10 MHz
• Ratio: 100:1
 
The Pulse Voltage Divider PVD 10-3 has been designed to measure the pulse output of surge generators, e.g. a combination wave generators. It consists of the divider and a double shielded coaxial cable.

 

 

 
PVD 10-3 Pulse Voltage Divider
PVD 10-3 Pulse Voltage Divider

 

Summary:
• Pulse Voltage Divider
• Input voltage: 10 kV
• Bandwidth: 10 MHz
• Ratio: 1000:1
 
The Pulse Voltage Divider PVD 10-3 has been designed to measure the pulse output of surge generators, e.g. a combination wave generators. It consists of the divider and a double shielded coaxial cable.

 

 

 
SCK 105 Surge Calibration Kit
SCK 105 Surge Callibration Kit

 

Summary:
• Surge Calibration Kit
• Input voltage: 12kV
• Ratio: 1000:1
• Bandwidth: 10MHz
 
The Surge Calibration Kit has been designed to measure the pulse output voltage and the pulse output current of surge generators, e.g. a combination wave generator. It essentially consists of a pulse voltage divider, a pulse current measuring resistor and a double shielded coaxial cable.

 

 

 
BCK 400 F Burst Calibration Kit
BCK 400 F Burst Calibration Kit

 

Summary:
• Burst Calibration Kit
• Input voltage: 5 kV
• Ratio, 200/400:1
• Bandwidth: 400 MHz
 
The Burst Calibration Kit has been designed to measure the pulse output voltage and the pulse output current of burst generators, e.g. the EFTG 4510 or the burst generator sub-unit of the CE-TESTER. It essentially consists of a load resistor, a pulse voltage divider and a double shielded coaxial cable.
 
Related Standards:
IEC: IEC 61000-4-04

 

 

 

High voltage dividers

Data Sheet
 
Description
 
High-voltage dividers for AC, DC- or impulse voltage
Broad band high voltage dividers HVT *** RCR
for DC- AC- and impulse voltages
HVM 2015
High-voltage measurement equipment
for AC, DC and Pulse voltages
Usable with all Hilo-Test high-voltage dividers HVT XXX RCR
PVD
Pulse voltage divider
For impulse voltage 1,2/50 us,  until max. 12 KV 
Ratio 100:1, 1000:1
 

 

Request a Quote / Contact Us!

 

 

Hilo-Test product Line

HILO-TEST Company Information

HILO-TEST Product Categories:
AC DC Test Equipment
Accessories
Automotive EMC Test Systems
Burst (EFTG) Simulators / Burst Calibration Kit
Coupling Network (CDN)
ESD Generators
High Voltage Dividers
Impulse Current Generators
Impulse Voltage Generators
Miscellaneous Products
Multifunction Generators
Oscillatory wave generator systems
Power Fail Generators
Ring-wave Generators
Shunts
Software
Surge (Hybrid) Generators
Telecom Generators

HILO-TEST PRODUCTS BY STANDARDS CATAGORIES
EMC Test Equipment
CCITT Test Equipment, Series K
 
Component Test Generators
  • • High Voltage Pulse Generators
    • • PG 10-200/PG 12-360 Accessories
    • High Current Pulse Generator
High Voltage Test and Measurement Equipment
  • • AC and DC
    • High Voltage Measurement Equipment
    • Calibration Equipment
Other Products

Reliant EMC Product Lines