Reliant EMC

EMC Test & Control Combination Unit

Frankonia EMC Test and Control Combination Unit - ECU-3/-6

 

Description

The ECU-3/-6 is a central EMC test and control unit, which combines in just one compact box many major test components like a signal generator, a power meter, directional couplers and a relay switching unit, which are needed for EMC tests.
That reduces the cabling work and possible cabling mistakes to a minimum. Furthermore it includes general functions like EUT-monitoring and an interlock safety-system.
With all the functions described above, the ECU-3/-6 is a simple to use, combination solution, which can be used for many different conducted and radiated immunity tests as well as control unit to switch between EMI-receiver and spectrum analyzer and different measuring antennas without time consuming cabling work.
The ECU-3/-6 can control and switch automatically between up to four external amplifiers, all connected to the ECU-3/-6 and up to three different outputs for antennas or coupling devices (CDNs, EM-coupling clamp, BCI-clamps).
The integrated signal generator is available to cover the frequency range from 9 kHz to 3 GHz or from 9 kHz to 6 GHz.
Amplitude modulation is available with a modulation rate of 1 Hz to 30 kHz and a modulation depth of 0 % to 90 %.
Pulse modulation can be switched on with a repetition frequency of 0.1 Hz to 100 kHz and a duty cycle of 1 % - 99 %.
In a word, it includes all requirements according to present EMC standards and it is best prepared for possible future changes.
 
Features:
• Signal Generator, 9 kHz – 3/6 GHz
• RF-Power Meter, 10 kHz – 6 GHz
• Directional Couplers, 10 kHz – 6 GHz
• RF-Relay Switching Unit
• EUT-monitoring
• Control of up to four external RF-Power Amplifiers
• Control of up to two external EMI-Receivers
Special Features:
• Conducted immunity tests according to IEC/EN 61000-4-6, 10 kHz – 230 MHz
• BCI-tests according to ISO 11452-5 and MIL-STD 461, CS 114
• Radiated immunity tests according to:
• IEC/EN 61000-4-3
• ISO 11452-2/3/4/5
• MIL-STD 461, RS 103
• Automatic switching between up to four external power amplifiers and connected coupling units / antennas
• Automatic switching between up to two EMI receivers, spectrum analyzers and three different antennas
• Easy integration into any control software by dll-driver Integrated interlock safety system
 
FRANKONIA-EMC-Test-and-Control-Unit-ECU-3-6-Diagram
FRANKONIA EMC Test and Control Unit ECU-3/-6 Diagram
 
Accessories for the ECU-3/-6
ECU-3 - Compact EMC control unit, basic Instrument, 9 kHz - 3 GHz ECU-6 - Compact EMC control unit, basic Instrument, 9 kHz - 6 GHz ECU-DC1A - Directional Coupler, 10 kHz -250 MHz, 30 dB, 100 W ECU-DC1B - Directional Coupler, 10 kHz - 400 MHz, 30 dB, 100 W
ECU-DC1C - Directional Coupler, 10 kHz - 250 W, 30 dB, 500 W
ECU-DC2 - Directional Coupler, 80 MHz - 1000 MHz, 50dB, 1500 W
ECU-DC3 - Directional Coupler, 1 GHz- 4 GHz, 40 dB, 600 W
ECU-DC4 - Directional Coupler, 2 GHz - 8 GHz, 40 dB, 600 W
ECU-KS2 - Cable-set and GPIB interface for immunity test systems with 2 amplifiers
ECU-KS3 - Cable-set and GPIB interface for immunity test systems with 3 amplifiers
ECU-KS4 - Cable-set and GPIB interface for immunity test systems with 4 amplifiers
ECU-LAN - Additional interface: LAN
ECU-OUT2 - Switching between 2 outputs (antenna/load)
ECU-OUT3 - Switching between 3 outputs (antenna/load)
ECU-PM1 - RF-Power Meter / RF-milli-voltmeter, 10 kHz - 500 MHz, 1 channel
ECU-PM2 - RF-Power Meter / RF-milli-voltmeter, 100 kHz - 6 GHz, 1 channel
ECU-REC1 - Switching to emission path and connection of 1 measuring receiver / spectrum analyzer
ECU-REC2 - Switching to emission path and connection of 2 measuring receivers / spectrum analyzers
ECU-RI - 19"-Rack version
ECU-SW6 - Standard software for testing according to IEC/EN 61000-4-6 in a system with ECU-3/-6

 
For detailed information, please see the associated downloads below!


Associated Downloads

 
 
 
Request a Quote / Contact Us!
 

FRANKONIA Product Line

Reliant EMC Product Lines