Reliant EMC

EMC Test Design Isotropic Ultra Broadband Electric Field Probes

PI-SH-FCC and PI-SH-ICNIRP 300KHz-18 GHz Isotropic Shaped Frequency Response Electric Field Probes

The PI-SH (ICNIRP or FCC) are isotropic electric field probes with shaped frequency response meeting the ICNIRP or FCC RF safety standards for occupational and general public exposure limits (see the specified frequency ranges below). Meter readings are shown in % of the STD - standard reference level, eliminating the need to know the source frequency. Probe output is proportional to RF power density in the whole specified power range, producing the correct RF power measurements in single and multi-signal environments, typically present at multiple antenna sites.

 

Main System Parameters

• Probe variants:
PI-SH-ICNIRP and PI-SH-FCC
• Frequency range:
100KHz-8 GHz (Occupational exposure)
 
10 MHz-8 GHz (General public: ICNIRP)
 
3 MHz-8 GHz (General population: FCC)
• Diode based:
3-Axial isotropic sensor, composite output.
• Power density range:
0.5-1000% of STD.
• Probe power nonlinearity:
Less than 3 dB (0.5-1000%).
• Readout power nonlinearity:
 Less than 1 dB (0.5-1000%).
• Rotational isotropicity:
+/-1dB (0.1 MHz-1GHz), +/-3dB(1-8GHz)
• Probe frequency response:
Per STD, deviation - less than 3 dB (documented).
• Calibration accuracy:
1 dB (@100 MHz).
• Temperature:
 0-50°C,
• Humidity:
RH 10-90%, non-condensing.
• Temperature error:
 <0.05 dB/°C
• Calibration:
UK NPL (UK National Physics Lab) traceable.
• Small size:
 LxD: 9.0x2.25 inch, 230x58 mm.
• Weight:
0.2 lb, 100 g.
• Supporting equipment:
RFP-05M meter.
• Country of origin:
 Designed and made in the USA.

 

Associated Downloads

 

Isotropic Ultra Broadband Electric Field Probe PI-05 1 MHz- 40 GHz, 2 – 1000 V/m.

Modern design probe PI-05, extends the requirements of most EMC and RF safety standards for industrial, military and radar communication applications.
High overload field strength limit and operation up to 40 GHz makes this probe a versatile measuring tool for all applications including the microwave K-Band.  This probe works with all RFP-05 type meters.

EMC-Test-Design-PI-05

Associated Downloads

 

Video 1: EMC Test Design, LLC introduces Smart Fieldmeter® product Video 4: Isotropic Electric Field Probe with Shaped Frequency Response per ICNIRP and FCC PI - SH - ICNIRP and PI - SH - FCC

 

Isotropic Pulsed Electric Field Probe PI-03P 100 MHz-18 GHz

100 MHz-18 GHz, 70-1400 V/m. Broadband isotropic electric field probe PI-03P measures the pulsed RF field produced by the microwave radars. It has fast sampling capability measuring the field strength of RF bursts (pulses) as short as 1 us (one microsecond). It operates in the frequency range 100 MHz – 18 GHz, covering the test requirements of MIL STD-461 and automotive EMC GM and Ford specifications.

EMC-Test-Design-Probe-PI-03P

Associated Downloads

 

Isotropic Broadband Electric Field Probe PI-03 : 3MHz- 18 GHz, 0.8 – 800 V/m.

Classic design probe PI-03, meets the requirements of most EMC and RF safety standards for industrial, military and radar communication applications. High overload limit and stability of the parameters make this probe a versatile measuring tool for all use cases.

EMC Test Design Field Probe PI-03

Associated Downloads

 

Isotropic Broadband Electric Field Probe PI-01E : 100 KHz- 6 GHz, 0.3 – 600 V/m

State of the art probe PI-01E, meets the requirements of new EMC and RF safety standards. It allows measurements of RF fields produced by most of the broadcast, telecommunication and industrial sources. This probe eliminates the need for two probes to cover the required frequency range 100 KHz- 6 GHz, thus making measurements simpler and faster.

EMC-Test-Design-Probe-PI-01E

EMC-Test-Design-Probe-PI-01E-on-tripod

Associated Downloads

 

 

Isotropic Broadband Electric Field Probe Probe PI-01 200 KHz- 3 GHz, 0.2 – 600 V/m

Classic design probe PI-01, meets the requirements of present EMC and RF safety standards. It allows measurements of RF fields produced by most of the broadcast, telecommunication and industrial sources. High sensitivity and stability of the parameters ensures a long term field life.

EMC-Test-Design-Probe-PI-01

Associated Downloads

 

Isotropic Field Probe PI-01C 500 MHz-2GHz, 0.5-600 V/m.

Electric field probe PI-01C was designed for selective RF measurements. The ability to attenuate the signals above 3 GHz and reject signals below 300 MHz makes it invaluable tool for cell phone tower certification.

EMC-Test-Design-Probe-PI-01C

Associated Downloads

 

Isotropic Dual Band Electric Field Probe PI-01V 900-1900MHz

Dual band probe PI-01V was designed for selective RF measurements. The ability to select only specified frequency bands and reject all the rest makes it invaluable tool for cell phone tower certification.

EMC-Test-Design-Probe-PI-01V

Associated Downloads

 

Isotropic Broadband Electric Field Probe PI-01LF 10KHz-3GHz

Broadband probe PI-01LF, meets the requirements of various EMC and RF safety standards. It allows measurements of RF fields produced by most of the broadcast, telecommunication and industrial sources. This probe eliminates the need for two probes to cover the required frequency range 10 KHz- 3 GHz, thus making measurements simpler and faster.

EMC-Test-Design-Probe-PI-01LF-on-tripod

 

Associated Downloads

 

Isotropic Broadband Magnetic Field Probe PI-H1 0.5MHz-50MHz

State of the art probe PI-H1 is used for assessment of the limits for maximum permissible exposure of occupational and general population to RF magnetic fields. Probe covers the frequencies of major industrial, broadcast and telecommunication sources, has flat response in the pass band 2-50 MHz and usable response to 500 KHz (with correction factors), eliminating the typical need for two probes. PI-H1 probe is very compact, rugged and offers good magnetic field overload capability and pick up suppression of the out-of-band electric and magnetic fields.

EMC-Test-Design-Probe-PI-H1

Associated Downloads

NEW! PI-SH-ICNIRP and PI-SH-FCC Isotropic Electric Field Probes

PI-SH-ICNIRP and PI-SH-FCC Isotropic Electric Field Probes with Shaped Frequency Response per ICNIRP and FCC.

 

EMC-Test-Design-PI-SH-ICNIRP-and-PI-SH-FCCIsotropic-Electric-Field-Probe

PI-SH (ICNIRP or FCC) is an isotropic electric field probe with shaped frequency response meeting the ICNIRP or FCC RF safety standards for occupational and general public exposure limits (see the specified frequency ranges below).
Meter readings are shown in % of the STD - standard reference level, eliminating the need to know the source frequency.
Probe output is proportional to RF power density in the whole specified power range, producing the correct RF power measurements in single and multi-signal environments, typically present at multiple antenna sites.

 

 

Main System Parameters

• Probe variants: PI-SH-ICNIRP and PI-SH-FCC
• Frequency range:
- 100KHz-8 GHz (Occupational exposure)
- 10 MHz-8 GHz (General public: ICNIRP)
- 3 MHz-8 GHz (General population: FCC)
• Diode based: 3-Axial isotropic sensor, composite output.
• Power density range: 0.5-1000% of STD.
• Probe power nonlinearity: Less than 3 dB (0.5-1000%).
• Readout power nonlinearity: Less than 1 dB (0.5-1000%).
• Rotational isotropicity: +/-1dB (0.1 MHz-1GHz), +/-3dB(1-8GHz)
• Probe frequency response: Per STD, deviation - less than 3 dB (documented).
• Calibration accuracy: 1 dB (@100 MHz).
• Temperature: 0-50°C,
• Humidity: RH 10-90%, non-condensing.
• Temperature error: <0.05 dB/°C
• Calibration: UK NPL (UK National Physics Lab) traceable.
• Small size: LxD: 9.0x2.25 inch, 230x58 mm.
• Weight: 0.2 lb, 100 g.
• Supporting equipment: RFP-05M meter.
• Country of origin: Designed and made in the USA.

 

Associated Downloads

 



Associated Downloads

Request a Quote / Contact Us!

EMC Test Design Landing Page
 

EMC Test Design Test Equipment