Reliant EMC

Aaronia Broadband Pre-Amplifiers

Aaronia Broadband Pre-Amplifiers
• Aaronia Low Noise Amplifier UBBV 0910
• Aaronia Bypass Amplifier UBBV 1060 BPA
• Aaronia 15dB Ultra-Wideband Pre-amplifier UBBV DC20
• Aaronia 40dB Broadband Preamplifier UBBV1
• Aaronia 40dB RF Broadband Preamplifier UBBV2
• Aaronia 25dB Low Frequency Amplifier UBBV-NF-25

Aaronia Low Noise Amplifier UBBV 0910
Aaronia Low Noise Amplifier UBBV 0910
Aaronia Low Noise Amplifier UBBV 0910
Low Noise Amplifier UBBV 0910 Ultra low noise pre-amplifier up to 6GHz. Works with any brand of Spectrum Analyzers. Directly fits to SPECTRAN Handheld Analyzer. Low noise of only 0,4dB and gain of typ. 22dB.

Technical data
Frequency range: 9kHz to 6GHz (provides gain up to 10GHz)
Noise: 0,4dB (typ.)! Gain: 22dB (typ.), see datasheet graph
Max. power at RF input: +10dBm
Max. power at RF output: +8dBm
Saturation power: -12dBm (50 ohms)
Input: 50 Ohm SMA (f)
Output: 50 Ohm SMA (m)
Weight: 146gr Dimensions: 81x61x29mm
Warranty: 10 years

Highlights:
ULTRA LOW NOISE OF ONLY 0,4dB!
Suitable for any brand of
Spectrum Analyzers or antennas
Fits perfectly to any SPECTRAN (mounting brackets included)
Runs with battery or external power supply
VERY LONG RUNTIME UP TO 30 HOURS WITH A FULL CHARGE!
Integrated calibration data on EEprom (readout via integrated USB interface, in preparation)
Very thick (2mm) aluminum housing offering very good screening
Includes international charger (110V/220V) and adapter

Included in delivery
UBBV 0910 RF Broadband Preamplifier
2 mounting brackets for SPECTRAN
LiPo-Battery (integrated)
Battery charger and power supply incl. international adapter set
Aluminum carrying case with foam protection
Detailed English manual (on CD)
SMA tool
Cleaning brush

Aaronia_AG_EMC_Analyzer_Bundle-1_Data_Sheet Aaronia UBBV 0910 Series Broadband Pre-Amplifier Data Sheet
Aaronia Bypass Amplifier UBBV 1060 BPA
Aaronia Bypass Amplifier UBBV 1060 BPA
Aaronia Bypass Amplifier UBBV 1060 BPA
Bypass Amplifier UBBV 1060 BPA Low noise pre-amplifier with bypass-mode up to 6GHz. Works with any brand of Spectrum Analyzers. Adjust to weak or strong signals at the press of a button. 0,4dB Noise, typ. 23dB gain and +48dBm IP3.

Highlights:
WITH BYPASS-MODE FOR STRONG SIGNALS!
Suitable for any brand of Spectrum Analyzers or antennas
Fits perfectly to any SPECTRAN (mounting brackets included)
Runs with battery or external power supply
LONG RUNTIME UP TO 8 HOURS WITH A FULL CHARGE!
Integrated calibration data on EEprom (readout via integrated USB interface, in preparation)
Very thick (2mm) aluminum housing offering very good screening
Includes international charger (110V/220V) and adapter

Technical data
Frequency range: 100MHz to 6GHz
Noise: 0,9dB (Bypass-Mode) / 1,4dB (Amp. ON)
Gain: 23dB (typ.), see datasheet graph IP3: +34dBm (Amp. ON) / +48dBm (Bypass-Mode)
Max. power at RF output: +21dBm
Input: 50 Ohm SMA (f)
Output: 50 Ohm SMA (m)
Weight: 146gr
Dimensions: 81x61x29mm
Warranty: 10 years

Included in delivery
UBBV 1060 BPA RF Broadband Preamplifier
2 mounting brackets for SPECTRAN
LiPo-Battery (integrated)
Battery charger and power supply incl. international adapter set
Aluminum carrying case with foam protection
Detailed English manual (on CD) SMA tool Cleaning brush

Aaronia_AG_EMC_Analyzer_Bundle-1_Data_Sheet Aaronia UBBV 1060 Series Broadband Pre-Amplifier Data Sheet
Aaronia 15dB Ultra-Wideband Pre-amplifier UBBV DC20
Aaronia 15dB Ultra-Wideband Pre-amplifier UBB
Aaronia 15dB Ultra-Wideband Pre-amplifier UBBV DC20
15dB Ultra-Wideband Pre-amplifier UBBV DC20 The allround amplifier up to 20GHz. Works with any brand of Spectrum Analyzers. Directly fits to any SPECTRAN. Very flat gain and unreached broadband performance.

Highlights:
Suitable for any brand of
SpectrumAnalyzers or antennas
Fits perfectly to any SPECTRAN (mounting brackets included)
Runs with battery or external power supply
Integrated LiPo battery (up to 3,5h run time)
Integrated calibration data on EEprom (readout via integrated USB interface, in preparation)
Very thick (2mm) aluminum housing offering very good screening
Includes international charger (110V/220V) and adapter

Technical data
Frequency range: DC to 20GHz
Noise: 2,5dB (typ.)
Gain: typ. 14dBi (graph see datasheet)
Max. power at RF input: +15dBm
Max. power at RF output: +16dBm
Saturation power: 0dBm (50 ohms)
Input: 50 Ohm SMA (f)
Output: 50 Ohm SMA (m)
Weight: 146gr
Dimensions: 81x61x29mm
Warranty: 10 years

Included in delivery
UBBV DC20 RF Broadband Preamplifier
2 mounting brackets for SPECTRAN
LiPo-Battery (integrated)
Battery charger and power supply incl. international adapter set
Aluminum carrying case with foam protection
Detailed English manual (on CD)
SMA tool
Cleaning brush

Aaronia_AG_EMC_Analyzer_Bundle-1_Data_Sheet Aaronia UBBV DC20 Series Broadband Pre-Amplifier Data Sheet
 

Aaronia 40dB Broadband Preamplifier UBBV1
Aaronia 40dB Broadband Preamplifier UBBV1
Aaronia 40dB Broadband Preamplifier UBBV1
40dB Broadband Preamplifier UBBV1 Low Noise Broadband Pre-Amplifier. Directly fits to any SPECTRAN. Also works with any other brand of Spectrum Analyzers. Offers o broad frequency range and increases the sensitivity by up to 40dB

Highlights:
Suitable for any brand of Spectrum Analyzers or antennas
Fits perfectly to any SPECTRAN (mounting brackets included)
Runs with battery or external power supply
Integrated LiPo battery (up to 3,5h run time)
Integrated calibration data on EEprom (readout via integrated USB interface)
Very thick (2mm) aluminum housing offering very good screening
Includes international charger (110V/220V) and adapter

Technical data
Frequency range: 1MHz to 1GHz
Noise: 3,5dB (typ.)
Gain: 40dB (typ.)
Max. power at RF input: +15dBm
Max. power at RF output: +15dBm
Saturation power: -25dBm (50 ohms)
Input: 50 Ohm SMA (f) Output: 50 Ohm SMA (m)
Weight: 146gr
Warranty: 10 years

Included in delivery
UBBV1 EMC Broadband Preamplifier
2 mounting brackets for SPECTRAN
LiPo-Battery (integrated)
Battery charger and power supply incl. international adapter set
Aluminum carrying case with foam protection*
Detailed English manual (on CD)
SMA tool Cleaning brush
* If ordered with a SPECTRAN, the preamplifier will be supplied without carrying case (delivery within SPECTRAN carry case).

Aaronia_AG_EMC_Analyzer_Bundle-1_Data_Sheet Aaronia UBBV1 Series Broadband Pre-Amplifier Data Sheet
Aaronia 40dB RF Broadband Preamplifier UBBV2
Aaronia 40dB RF Broadband Preamplifier UBBV2
Aaronia 40dB RF Broadband Preamplifier UBBV2
40dB RF Broadband Preamplifier UBBV2 High-gain RF Pre-amplifier up to 10GHz. Works with any brand of Spectrum Analyzers. Directly fits to any SPECTRAN. Broadband RF sensitivity increase by up to 40dB.

Highlights:
Suitable for any brand of Spectrum Analyzers or antennas
Fits perfectly to any SPECTRAN (mounting brackets included)
Runs with battery or external power supply
Integrated LiPo battery (up to 3,5h run time)
Integrated calibration data on EEprom (readout via integrated USB interface)
Very thick (2mm) aluminum housing offering very good screening
Includes international charger (110V/220V) and adapter

Technical data

Frequency range: 1MHz to 10GHz (500kHz with 3dB difference)
Noise: 3,5dB (typ.)
Gain: 40dB (typ.) with "linear" fall off: 1MHz: 40dB; 3GHz: 37.5dB; 6GHz: 35dB; 8GHz: 25dB; 10GHz: 20dB
Max. power at RF input: +15dBm
Max. power at RF output: +15dBm
Saturation power: -25dBm (50 ohms)
Input: 50 Ohm SMA (f)
Output: 50 Ohm SMA (m)
Weight: 146gr
Warranty: 10 years

Included in delivery
UBBV2 RF Broadband Preamplifier
2 mounting brackets for SPECTRAN
LiPo-Battery (integrated)
Battery charger and power supply incl. international adapter set
Aluminum carrying case with foam protection*
Detailed English manual (on CD)
SMA tool Cleaning brush
* If ordered with a SPECTRAN, the preamplifier will be supplied without carrying case (delivery within SPECTRAN carry case).

Aaronia_AG_EMC_Analyzer_Bundle-1_Data_Sheet Aaronia UBBV2 Series Broadband Pre-Amplifier Data Sheet


Aaronia 25dB Low Frequency Amplifier UBBV-NF-25

Aaronia 25dB Low Frequency Amplifier UBBV-NF-25
25dB Low Frequency Amplifier UBBV-NF-25 Pre-amplifier up to 60MHz. Works with any brand of Spectrum Analyzers. Directly fits to any SPECTRAN. Specialized for the low frequency range (Hz / kHz / low MHz range).

Highlights:
Suitable for any brand of Spectrum Analyzers or antennas
Fits perfectly to any SPECTRAN (mounting brackets included)
Runs with battery or external power supply
Integrated LiPo battery (up to 3,5h run time)
Integrated calibration data on EEprom (readout via integrated USB interface)
Very thick (2mm) aluminum housing offering very good screening
Includes international charger (110V/220V) and adapter

Technical data
Frequency range: 1Hz to 50MHz (60MHz with -3dB bandwidth)
Gain: 25dB (typ.)
Max. input DC voltage: 10VDC
Max. input AC voltage: 3V or 2.1V RMS
Max. output power: +15dBm (50 Ohm)
Input: High impedance (100 kOhm)
SMA (f) Output: 50 Ohm SMA (m)
Weight: 146gr
Warranty: 10 years

Included in delivery
UBBV-NF-25 Broadband Preamplifier
2 mounting brackets for SPECTRAN
LiPo-Battery (integrated)
Battery charger and power supply incl. international adapter set
Aluminum carrying case with foam protection
Detailed English manual (on CD)
SMA tool
Cleaning brush

Aaronia_AG_EMC_Analyzer_Bundle-1_Data_Sheet Aaronia UBBV-NF-25 Series Broadband Pre-Amplifier Data Sheet



Request a Quote / Contact Us!

Aaronia
 

Aaronia product Line

Reliant EMC Product Lines